NETGEAR N450/CG3000Dv2 Set Up Your Wireless Network,  To view or configure the wireless settings

Page 18

N450 WiFi Cable Modem Router Model N450/CG3000Dv2

Set Up Your Wireless Network

To set up the wireless network, you can enter the wireless settings manually, or you can use Wi-Fi Protected Setup (WPS). To wirelessly connect to the modem router, a computer or wireless device must be configured with the same wireless settings as the modem router.

Configure Wireless Settings Manually

You can manually configure the wireless settings and security in the Wireless Settings screen.

To view or configure the wireless settings:

1. Use an Ethernet cable to connect your computer to a LAN port on the modem router.

Note: If you connect wirelessly to the modem router and then change its

wireless network name (SSID) or wireless security, you are disconnected after you click the Apply button on the Wireless Settings screen.

2.Type http://192.168.0.1 in the address field of your web browser. A login screen displays.

3.Enter the modem router user name and password.

The default user name is admin. The default password is password. The user name and password are case-sensitive.

The modem router main menu displays.

4.In the main menu, under Setup, select Wireless Settings.

Configuring Your Wireless Network

18

Image 18

Contents N450 WiFi Cable Modem Router Model N450/CG3000Dv2 Support ComplianceTrademarks Contents Appendix a Supplemental Information Connecting to the Internet Hardware Features Ethernet cable Power adapter Modem routerUnpack Your Modem Router Front Panel WPS Back Panel Label Position Your Modem Router To position your modem router Cable Your Modem Router  To cable your modem router To use WPS to connect to the WiFi network Connect Computer to the Modem Router To find and select the WiFi network Log In to Your Modem Router To log in to the modem router View Basic Settings  To view or configure basic settingsNotify Your Internet Service Provider Cable ISP Contact Information Configuring Your Wireless Network Set Up Your Wireless Network  To view or configure the wireless settingsConfiguring Your Wireless Network Use WPS Wireless Setup Add a Client Using the WPS Button  To add a client to your modem router using the WPS buttonConfiguring Your Wireless Network Add a Client Using a PIN  To add a client to your modem router using a PINSet Up Wi-Fi Multimedia  To set up Wi-Fi MultimediaChange the Password  To change the password Filtering Content View Denial of Service Attack Logs  To view or set up notification of attacks by emailLimit Internet Site Access  To block access to sites containing certain words To allow a keyword that was previously blocked  To block access to certain domains  To unblock a domain Allow Unrestricted Access  To allow unrestricted accessEnable or Disable Modem Router Features  To enable or disable specific firewall features  To enable or disable specific web features  To enable or disable specific NAT ALG Status features Filtering Content Maintaining Your Network View the Modem Router Status  To view the modem router status To view the modem router’s initialization procedure View the Connection StatusBack Up and Restore Your Settings  To back up the settings  To restore the backup settingsView the Event Log  To view or clear the event log Run the Diagnostic Utilities  To run a ping test To clear the results from the display Traceroute Utility  To run a traceroute test To clear the results from the display Maintaining Your Network Advanced Settings Advanced Wireless Settings  To configure advanced wireless settingsConfigure the settings described in the following table MAC FilteringAdvanced Settings  To stop blocking a computer  To set up IP filtering IP Filtering To remove a computer from the list Advanced Settings Port Blocking  To delete a device from the IP Filter List To add a custom service  To delete a custom service from the Active Filters table Port Forwarding Advanced Settings  To configure port triggering Port TriggeringAdvanced Settings  To remove a configured port trigger from the table  To return all trigger and target ranges to zero To set up a DMZ host DMZ HostLAN IP Setup  To configure LAN IP settingsSelect the Respond to Ping on WAN Port check box Click the Apply button Reserve an IP Address for Dhcp Use  To reserve an IP address for DhcpLAN Switch  To configure the switch ports To disable a LAN port Configure Universal Plug and Play  To configure UPnP To enable NTP Set Networking ProtocolsEnable Network Address Translation Access a USB Device on the Network  To disable NAT To access a USB device from a Windows computer  To access a USB device from a MAC computer Select Go Connect to Server Type smb//192.168.0.5 in the Server Address field To safely remove a USB device Click the Safely Remove USB Device button Troubleshooting Basic Functions Connect to the Modem Router’s Main MenuTroubleshoot a TCP/IP Network Using a Ping Utility Troubleshoot the ISP ConnectionTest the LAN Path to Your Modem Router PingTroubleshooting Supplemental Information Factory Default Settings Factory default settingsTechnical Specifications WPA/WPA2Supplemental Information