N450 WiFi Cable Modem Router Model N450/CG3000Dv2
The following screen displays:
5.Click the Next button.
The following screen displays:
6.Either click the WPS button 
on the screen, or press the WPS button 
on the front of the modem router.
The following occurs:
•The WPS LED on the front of the modem router begins to blink.
•The modem router tries to communicate with the wireless computer or device for two minutes.
•If the security option in the Wireless Settings screen was set to Disable, it is automatically changed to
7.Go to the computer or mobile device, and run its WPS configuration utility.
8.To click the WPS button, follow the utility’s instructions.
When the computer or mobile device connects to the wireless network, the modem router sends its SSID and
9.On the computer that just joined the wireless network, make sure that you can connect to the Internet.
Configuring Your Wireless Network
22