NETGEAR N450/CG3000Dv2 user manual  To enable or disable specific web features

N450 WiFi Cable Modem Router Model N450/CG3000Dv2

Firewall features appear near the top of the screen.

4.Do one of the following:

•To enable a firewall feature, select the check box next to the feature.

•To disable a firewall feature, clear the check box next to the feature.

5.Click the Apply button. Your changes are saved.

The following table describes the fields displayed in this screen.

Feature	Description
Firewall	• Enable. The modem router performs stateful packet inspection (SPI).
	• Disable. The modem router does not perform SPI.
IPSec Pass-Through	• Enable. The modem router forwards IPS traffic.
	• Disable. The modem router blocks traffic.
PPTP Pass-Through	• Enable. The modem router forwards PPTP traffic.
	• Disable. The modem router blocks PPTP traffic.
Multicast	• Enable. The modem router passes multicasting streams through the
	firewall.
	• Disable. The modem router blocks multicasting streams.
Port Scan Detection	• Enable. The modem router responds to Internet-based port scans.
	• Disable. The modem router does not respond to Internet-based port scans.
IP Flood Detection	• Enable. The modem router blocks malicious devices that are attempting to
	flood devices.
	• Disable. The modem router does not block malicious devices.

To enable or disable specific web features:

1. Type http://192.168.0.1 in the address field of your web browser.

Filtering Content

36