ArtDio Network Settings Using Status Button on IPS-2101h, Static IP Settings, Dhcp Settings

Page 10

IPS-2101h User Manual

5. Network Settings Using Status Button on IPS-2101h

The default network setting is DHCP mode

Press the Status Button on the IPS-2101h, and pick up the handset, you will be able to hear the voice prompt indicating the IP address of your IPS-2101h. If the IP address you hear is 0.0.0.0, then there is no IP address available or the internet connection is bad. Please follow the network settings described below.

IPS-2101h can use telephone to configure some simple network settings. Please use the web browser to configure more detailed settings.

5.1Static IP Settings

1.Connect the RJ-45 Ethernet cable to the LAN port on the IPS-2101h, and then plug in the power.

2.Connect the RJ-11 telephone cable to the FXS port on the IPS-2101h.

3.Pick up the handset. If you hear some short “Du Du Du” tones, or one long “Du” tone, the connection is good.

4.Pick up the handset Æ Press 1234 Æ If the green lights shows on the Status buttonÆ Press 0 Æ Hang up the phone to reboot IPS-2101h.

5.Pick up the handset Æ Press 1234 Æ If the green lights shows on the Status button Æ Enter the static IP address, for example, 192.168.1.101 (use “*” to represent “.”) Æ Press the Status Button on IPS-2101h Æ Hang up the phone to reboot IPS-2101h and to activate the new IP address.

5.2DHCP Settings

1.Connect the RJ-45 Ethernet cable to the LAN port on the IPS-2101h, and then plug in the power.

2.Connect the RJ-11 telephone cable to the FXS port on the IPS-2101h.

3.Pick up the handset. If you hear some short “Du Du Du” tones, or one long “Du” tone, the connection is good.

4.Pick up the handset Æ Press 1234 Æ If the green light shows on the Status Button, press 1 for DHCP Æ Press the Status Button on IPS-2101h Æ Hang up the phone.

5.Once IPS-2101h is rebooted, it will automatically acquire an IP address from DHCP server.

10

Image 10
Contents V1.0 Safety Instructions WEB Configuration Hardware InstallationNetwork Settings Using Status Button on IPS-2101h Passing Through the NAT/Firewall11.4 LAN Interface Product SpecificationsVoice Interface Phone InterfaceInstallation Package ContentFunctions Status Button Functions Status Indicator FunctionsLight Hardware Installation Connection with an IP Sharing Device or a RouterConnection without an IP Sharing Device or a Router Static IP Settings Network Settings Using Status Button on IPS-2101hDhcp Settings PPPoE Settings Fields Description WEB ConfigurationNetwork Settings IP TypeProtocol Settings Page NAT Addr Register Port Signal PortPhone Number Account Control port Register TTL Phone SettingsRTP Port Local Type Call Type Dial Number Dual ModeUse Dialplan DDD CodeAudio Settings Other Settings UpdateSIP with Stun Passing Through the NAT/FirewallSIP with Outbound Proxy Others Using IPS-2101hRegistration Message Pickup the PhoneFirmware Auto-upgrade Other Phone Operation11.1 H.323 Web Configuration Example AppendixMgcp Web Configuration Example How to Add a Prefix in Front of the Number Update InformationLos Angeles Office, U.S.A