ArtDio IPS-2101h user manual Firmware Auto-upgrade, Other Phone Operation

Page 22

IPS-2101h User Manual

9.3Other Phone Operation

The IPS-2101h has two international standard RJ-11 phone ports which allow you connect to all the standard phones, including traditional wireless phone and DECT wireless phone, with full function on the phone.

10.Firmware Auto-upgrade

If auto-upgrade function is enabled (please refer to “6.5 Other Settings”), IPS-2101h will automatically check the designate upgrade server to see if there is new firmware ready for download. If it does, IPS-2101h will download the firmware. After the firmware has been verified, IPS-2101h will update the firmware. At this period, the Status Button will blink with red and green light.

If upgrade fails, the Status Button will blink with red lights. Please reboot the IPS-2101h to restore the setup.

22

Image 22

Contents V1.0 Safety Instructions WEB Configuration Hardware InstallationNetwork Settings Using Status Button on IPS-2101h Passing Through the NAT/Firewall11.4 LAN Interface Product SpecificationsVoice Interface Phone InterfaceInstallation Package ContentFunctions Status Button Functions Status Indicator FunctionsLight Hardware Installation Connection with an IP Sharing Device or a RouterConnection without an IP Sharing Device or a Router Static IP Settings Network Settings Using Status Button on IPS-2101hDhcp Settings PPPoE Settings Fields Description WEB ConfigurationNetwork Settings IP TypeProtocol Settings Page NAT Addr Register Port Signal PortPhone Number Account Control port Register TTL Phone SettingsRTP Port Local Type Call Type Dial Number Dual ModeUse Dialplan DDD CodeAudio Settings Other Settings UpdateSIP with Stun Passing Through the NAT/FirewallSIP with Outbound Proxy Others Using IPS-2101hRegistration Message Pickup the PhoneFirmware Auto-upgrade Other Phone Operation11.1 H.323 Web Configuration Example AppendixMgcp Web Configuration Example How to Add a Prefix in Front of the Number Update InformationLos Angeles Office, U.S.A