ArtDio IPS-2101h user manual Status Button Functions, Status Indicator Functions, Light

Page 7

IPS-2101h User Manual

3.2Status Button Functions

There is a Status Button/Indicator on IPS-2101h indicating different status:

Safe Mode:

To enter to the safe mode, you can press the Status Button, and then plug into the power. The Status Indicator will flash with green and orange lights. It is used when reloading the firmware from failed firmware.

Voice Prompt IP:

When the phone hangs up, press the Status Button and then pick up the phone. You will hear the voice prompt IP telling you the current IP address of you IPS-2101h.

Setup status indication:

When the phone hangs up, pick up the handset and then press 1234. The Status Button will blink with green light, indicating that you are now in the configuration mode.

Registration status indication:

The Status Button will blink with red lights when rebooting, registering, or register failed,

Firmware updating indication:

Right after the firmware has been uploaded, the IPS-2101h will update the new firmware and the Status Button will blink with green and red lights. If IPS-2101h failed to reboot after the firmware updated, please update the firmware again in the safe mode.

System booting indication:

When the IPS-2101h is rebooting, the Status Button will blink with orange lights.

3.3Status Indicator Functions

Light

Power ON (red)

Hook (green)

PSTN (green)

LAN Act/Link (green)

Description Power supply ok.

Off-hook when in the IP mode. Off-hook when in the PSTN mode.

Green when connected, blinking when receiving or transmitting data.

7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents V1.0 Safety Instructions Passing Through the NAT/Firewall Hardware InstallationNetwork Settings Using Status Button on IPS-2101h WEB Configuration11.4 Phone Interface Product SpecificationsVoice Interface LAN InterfaceInstallation Package ContentFunctions Status Button Functions Status Indicator FunctionsLight Connection with an IP Sharing Device or a Router Hardware InstallationConnection without an IP Sharing Device or a Router Static IP Settings Network Settings Using Status Button on IPS-2101hDhcp Settings PPPoE Settings IP Type WEB ConfigurationNetwork Settings Fields DescriptionProtocol Settings Page NAT Addr Register Port Signal PortPhone Number Account Control port Register TTL Phone SettingsRTP Port Local Type Call Type DDD Code Dual ModeUse Dialplan Dial NumberAudio Settings Update Other SettingsSIP with Stun Passing Through the NAT/FirewallSIP with Outbound Proxy Pickup the Phone Using IPS-2101hRegistration Message OthersOther Phone Operation Firmware Auto-upgradeAppendix 11.1 H.323 Web Configuration ExampleMgcp Web Configuration Example Update Information How to Add a Prefix in Front of the NumberLos Angeles Office, U.S.A
Top Page Image Contents