ArtDio IPS-2101h user manual

Page 14

Jitter Size

Service Type

Service Addr

Service ID

NAT Traversal

IPS-2101h User Manual

Please do not check this box and leave the Service Addr field blank.

※If the Gatekeeper is not to be used, please configure the Service Port

as 1720. Detailed information please refers to the “Service Port” configuration.

zFor MGCP protocol:

Please check this box, and then enter the IP address or domain name of the Call Agent in the Service Addr field.

Setup the jitter buffer size for the RTP voice packet. Jitter buffer ensures that the received packets are in correct order. The range for the jitter size is between 0 to 32 voice packets. The default setting value of 0. A bigger jitter size can store more packets, but may cause more delay.

The default Service Type is “Common”. For other requests, please find the service type in the drop down list.

Enter the corresponding IP address or domain name of the server based on the protocol been used.

zUse H.323 protocol

„If “Use Service” option is checked, please enter the IP address or domain name of the Gatekeeper in this field.

„If “Use Service” option is not checked, please enter the IP address or domain name of the voice gateway in this field.

zUSE MGCP protocol:

Please enter the IP address or domain name of the Call Agent.

zUse SIP protocol:

If “Use Service” option is checked, please enter the IP address or domain name of the SIP Proxy Server in this field.

Enter the corresponding Service ID if required by the register server. When IPS-2101h is using a private IP to traverse the NAT, please select one of the conditions:

zDisable

„When IPS-2101h is using a public IP, select “Disable”.

„When IPS-2101h is using Outbound Proxy, select “Disable” and enter the IP address or domain name of the Outbound Proxy server in the Service Addr.

zEnable

Resolve public IP of the NAT router automatically. When IPS-2101h is using a private IP, please select “Enable”, then the NAT Addr will automatically activate. Without any special request, please enter 0.0.0.0 in the NAT Addr field and configure the corresponding port on the NAT router.

zSTUN

Use the STUN protocol. STUN enables a device to find out its public IP address and the type of NAT service its sitting behind. It helps the

14

Page 13 Page 15
Image 14
Page 13 Page 15
Contents V1.0 Safety Instructions WEB Configuration Hardware InstallationNetwork Settings Using Status Button on IPS-2101h Passing Through the NAT/Firewall11.4 LAN Interface Product SpecificationsVoice Interface Phone InterfaceFunctions Package ContentInstallation Light Status Indicator FunctionsStatus Button Functions Hardware Installation Connection with an IP Sharing Device or a RouterConnection without an IP Sharing Device or a Router Dhcp Settings Network Settings Using Status Button on IPS-2101hStatic IP Settings PPPoE Settings Fields Description WEB ConfigurationNetwork Settings IP TypeProtocol Settings Page Phone Number Account Register Port Signal PortNAT Addr RTP Port Local Type Call Type Phone SettingsControl port Register TTL Dial Number Dual ModeUse Dialplan DDD CodeAudio Settings Other Settings UpdateSIP with Outbound Proxy Passing Through the NAT/FirewallSIP with Stun Others Using IPS-2101hRegistration Message Pickup the PhoneFirmware Auto-upgrade Other Phone Operation11.1 H.323 Web Configuration Example AppendixMgcp Web Configuration Example How to Add a Prefix in Front of the Number Update InformationLos Angeles Office, U.S.A
Top Page Image Contents