Linksys RT31P2-NA manual Static IP, PPPoE

Page 19

Broadband Router with 2 Phone Ports

Static IP

If you are required to use a permanent IP address, then select Static IP.

IP Address. This is the IP address that the Router has, when seen from the Internet. Your ISP will provide you with the IP Address you need to specify here.

Subnet Mask. This is the Router’s Subnet Mask, as seen by external users on the Internet (including your ISP). Your ISP will provide you with the Subnet Mask.

Default Gateway. Your ISP will provide you with the Default Gateway Address.

DNS 1-3. Your ISP will provide you with at least one DNS (Domain Name System) Server IP Address.

PPPoE

Some DSL-based ISPs use PPPoE (Point-to-Point Protocol over Ethernet) to establish Internet connections for end-users. If you use a DSL line, check with your ISP to see if they use PPPoE. If they do, you will have to enable it.

User Name and Password. Enter the User Name and Password provided by your ISP.

Service Name. If provided by your ISP, enter the Service Name.

Connect on Demand and Max Idle Time. You can configure the Router to cut the Internet connection after it has been inactive for a specific period of time (Max Idle Time). If your Internet connection has been terminated due to inactivity, Connect on Demand enables the Router to automatically re-establish your connection as soon as you attempt to access the Internet again. If you wish to activate Connect on Demand, click the radio button. If you want your Internet connection to remain on at all times, enter 0 in the Max Idle Time field. Otherwise, enter the number of minutes you want to have elapsed before your Internet access disconnects.

Keep Alive and Redial Period. This option keeps your PPPoE-enabled Internet access connected indefinitely, even when it sits idle. If you select this option, the Router will periodically check your Internet connection. If the connection is down, then the Router will automatically re-establish the connection. To use this option, click the radio button next to Keep Alive. The default Redial Period is 30 seconds.

When you are finished, click the Save Settings button. Then click the Status tab, and click the Connect button to start the connection.

Note: For DSL users, if you need to enable PPPoE support, remember to remove any PPPoE applications that are installed on your PCs.

Chapter 5: Configuring the Router

Figure 5-4: Static IP

static ip address: a fixed address assigned to a computer or device connected to a network.

subnet mask: an address code that determines the size of the network

default gateway: a device that forwards Internet traffic from your local area network

Figure 5-5: PPPoE

pppoe: a type of broadband connection that provides authentication (username and password) in addition to data transport

13

The Setup Tab - Basic Setup

Page 18 Page 20
Image 19
Page 18 Page 20
Contents Broadband Router Copyright and Trademarks How to Use this GuideWord definition Table of Contents Ethernet Adapter Appendix a TroubleshootingCommon Problems and Solutions Frequently Asked Questions Appendix B Upgrading FirmwareFront Panel Back Panel23 Applications & Gaming Tab DMZ Welcome IntroductionWhat’s in this Guide? Broadband Router with 2 Phone Ports An Introduction to Local Area Networks Networking BasicsUse of IP Addresses Networking Basics Use of IP Addresses Phone2 Getting to Know the RouterFront Panel Overview Connecting the RouterConnect a PC Connection InstructionsSetup Configuring the RouterSecurity Status AdministrationVoice Applications & GamingInternet Connection Type How to Access the Web-based UtilitySetup Tab Basic Setup Internet SetupPPPoE Static IPPptp RAS for SingTelHeart Beat Signal Heart Beat SignalRouter IP Network SetupOptional Settings Network Address Server Settings DhcpTime Setting DynDNS.org Setup Tab DdnsTZO.com MAC Clone Setup Tab MAC Address CloneAdvanced Routing Setup Tab Advanced Routing13 Routing Table Entry List Filter MAC Address Security Tab FilterFilter IP Address Range Filter Port RangeConfiguring the Router Security Tab Filter VPN Passthrough Security Tab VPN PassthroughVoice Tab System Stun SettingsNAT Traversal Settings Voice Tab Line1 SettingsSubscriber Information Distinctive Ring Settings Call Forward SettingsSpeed Dial Settings Supplementary Service SettingsVoice Quality Settings 19 Voice Tab Line2 Voice Tab Line2 SettingsConfiguring the Router Voice Tab Line2 Settings Voice Quality Settings Port Range Forwarding Applications & Gaming Tab Port Range ForwardingPort Range Forwarded Range Applications & Gaming Tab Port TriggeringPort Triggering Triggered RangeUPnP Forwarding Applications & Gaming Tab UPnP ForwardingBroadband Router with 2 Phone Ports DMZ Applications & Gaming Tab DMZApplication-based QoS Applications & Gaming Tab QoSPort-based QoS Voice QoS Remote Router Access Administration Tab ManagementRouter Password Local Router Access26 Backup & Restore Configuration Backup and RestoreLog Administration Tab LogFactory Defaults Administration Tab Factory DefaultsUpgrade Firmware Administration Tab Firmware UpgradeLine2 Status Status Tab VoiceInformation Line1 Status33 Status Tab Router Status Tab RouterLocal Network Status Tab Local NetworkCommon Problems and Solutions Appendix a TroubleshootingFor Windows For Windows 98 and MillenniumNeed to set a static IP address on a PC Want to test my Internet connection For Windows XPFor Windows Am not able to access the Router’s Web-based Utility Setup Need to set up a server behind my Router TCP Application Start and End Protocol IP Address EnabledCan’t get the Internet game, server, or application to work For Netscape 4.7 or higher To start over, I need to set the Router to factory defaultNeed to upgrade the firmware For Microsoft Internet Explorer 5.0 or higherMy DSL service’s PPPoE is always disconnecting Firmware upgrade failedNeed to use port triggering Frequently Asked Questions Does the Router support ICQ send file? If all else fails in the installation, what can I do?How can I block corrupted FTP downloads? Is the Router cross-platform compatible? What is DMZ Hosting?How many ports can be simultaneously forwarded? How can I check whether I have static or Dhcp IP addresses? Which modems are compatible with the Router?How do I get mIRC to work with the Router? Appendix B Upgrading Firmware Figure B-1 Upgrade FirmwareWindows 2000 or XP Instructions Windows 98 or Me InstructionsFigure C-3 MAC Address/Physical Address For the Router’s Web-based UtilityShared Resources Appendix D Windows HelpNetwork Neighborhood/My Network Places Appendix E Glossary Broadband Router with 2 Phone Ports Broadband Router with 2 Phone Ports Broadband Router with 2 Phone Ports Broadband Router with 2 Phone Ports Appendix F Specifications 0ºC to 40ºC 32ºF to 104ºF Storage TempOperating Humidity Storage HumidityLimited Warranty Appendix G Warranty InformationFCC Statement Appendix H Regulatory InformationNeed to contact Linksys? Appendix I Contact InformationInformation section in this Guide

RT31P2-NA specifications

The Linksys RT31P2-NA is a versatile voice-over-IP (VoIP) router designed to seamlessly combine internet connectivity with telephone services. Targeted at home users and small businesses, the device acts as a gateway through which users can connect multiple computers and internet-enabled devices while also facilitating digital phone services.

One of the standout features of the RT31P2-NA is its ability to support multiple voice lines, allowing users to make and receive calls while simultaneously using the internet. This dual functionality is made possible by its built-in VoIP capabilities, which leverage Session Initiation Protocol (SIP) technology, ensuring high-quality voice calls without interruptions from internet traffic.

In terms of connectivity, the router includes a standard Ethernet WAN port and four Ethernet LAN ports, providing ample options for wired connections to various devices. This setup is ideal for households or small offices that require stable, high-speed internet access across numerous devices. Additionally, the router features two telephone ports, allowing users to connect traditional analog phones directly for VoIP services.

Security is a key characteristic of the RT31P2-NA. It incorporates advanced security protocols such as WPA2 encryption and firewall capabilities to protect users' networks from unauthorized access and cyber threats. The router also supports Quality of Service (QoS) features, enabling users to prioritize bandwidth allocation for voice calls and other critical applications, ensuring minimal lag and superior call quality.

The design of the RT31P2-NA is user-friendly, with an intuitive interface that simplifies the setup process. The integrated configuration wizard helps users connect to their internet service and set up telephony services with ease. Furthermore, firmware updates can be easily managed, keeping the device secure and running optimally.

Moreover, Linksys is known for its reliable customer support and warranty services, which enhance the overall experience for users. The RT31P2-NA is a robust option for individuals and small businesses looking to streamline their communication needs while enjoying reliable internet connectivity. Whether for personal use or office applications, this router delivers a balanced mix of performance, functionality, and ease of use.
Top Page Image Contents