Linksys RT31P2-NA manual For Windows 98 and Millennium, Need to set a static IP address on a PC

Page 54

Broadband Router with 2 Phone Ports

B.Press CTRL + F5. This is a hard refresh, which will force Windows Explorer to load new webpages, not cached ones.

C.Click Tools. Click Internet Options. Click the Security tab. Click the Default level button. Make sure the security level is Medium or lower. Then click the OK button.

4.I need to set a static IP address on a PC.

The Router, by default, assigns an IP address range of 192.168.15.100 to 192.168.15.150 using the DHCP server on the Router. To set a static IP address, you can only use the ranges 192.168.15.2 to 192.168.15.99 and 192.168.15.151 to 192.168.15.254. Each PC or network device that uses TCP/IP must have a unique address to identify itself in a network. If the IP address is not unique to a network, Windows will generate an IP conflict error message. You can assign a static IP address to a PC by performing the following steps:

For Windows 98 and Millennium:

A.Click Start, Setting, and Control Panel. Double-click Network.

B.In The following network components are installed box, select the TCP/IP-> associated with your Ethernet adapter. If you only have one Ethernet adapter installed, you will only see one TCP/IP line with no association to an Ethernet adapter. Highlight it and click the Properties button.

C.In the TCP/IP properties window, select the IP address tab, and select Specify an IP address. Enter a unique IP address that is not used by any other computer on the network connected to the Router. You can only use an IP address in the ranges 192.168.15.2 to 192.168.15.99 and 192.168.15.151 to 192.168.15.254. Make sure that each IP address is unique for each PC or network device.

D.Click the Gateway tab, and in the New Gateway prompt, enter 192.168.15.1, which is the default IP address of the Router. Click the Add button to accept the entry.

E.Click the DNS tab, and make sure the DNS Enabled option is selected. Enter the Host and Domain names (e.g., John for Host and home for Domain). Enter the DNS entry provided by your ISP. If your ISP has not provided the DNS IP address, contact your ISP to get that information or go to its website for the information.

F.Click the OK button in the TCP/IP properties window, and click Close or the OK button for the Network window.

G.Restart the computer when asked.

For Windows 2000:

A.Click Start, Settings, and Control Panel. Double-click Network and Dial-Up Connections.

B.Right-click the Local Area Connection that is associated with the Ethernet adapter you are using, and select the Properties option.

C.In the Components checked are used by this connection box, highlight Internet Protocol (TCP/IP), and click the Properties button. Select Use the following IP address option.

Appendix A: Troubleshooting

48

Common Problems and Solutions

Page 53 Page 55
Image 54
Page 53 Page 55
Contents Broadband Router How to Use this Guide Copyright and TrademarksWord definition Table of Contents Appendix B Upgrading Firmware Appendix a TroubleshootingCommon Problems and Solutions Frequently Asked Questions Ethernet AdapterBack Panel Front Panel23 Applications & Gaming Tab DMZ Introduction WelcomeWhat’s in this Guide? Broadband Router with 2 Phone Ports Networking Basics An Introduction to Local Area NetworksUse of IP Addresses Networking Basics Use of IP Addresses Getting to Know the Router Phone2Front Panel Connecting the Router OverviewConnection Instructions Connect a PCConfiguring the Router SetupSecurity Applications & Gaming AdministrationVoice StatusInternet Setup How to Access the Web-based UtilitySetup Tab Basic Setup Internet Connection TypeStatic IP PPPoERAS for SingTel PptpHeart Beat Signal Heart Beat SignalNetwork Address Server Settings Dhcp Network SetupOptional Settings Router IPTime Setting Setup Tab Ddns DynDNS.orgTZO.com Setup Tab MAC Address Clone MAC CloneSetup Tab Advanced Routing Advanced Routing13 Routing Table Entry List Filter Port Range Security Tab FilterFilter IP Address Range Filter MAC AddressConfiguring the Router Security Tab Filter Security Tab VPN Passthrough VPN PassthroughStun Settings Voice Tab SystemVoice Tab Line1 Settings NAT Traversal SettingsSubscriber Information Supplementary Service Settings Call Forward SettingsSpeed Dial Settings Distinctive Ring SettingsVoice Quality Settings Voice Tab Line2 Settings 19 Voice Tab Line2Configuring the Router Voice Tab Line2 Settings Voice Quality Settings Applications & Gaming Tab Port Range Forwarding Port Range ForwardingPort Range Triggered Range Applications & Gaming Tab Port TriggeringPort Triggering Forwarded RangeApplications & Gaming Tab UPnP Forwarding UPnP ForwardingBroadband Router with 2 Phone Ports Applications & Gaming Tab DMZ DMZApplications & Gaming Tab QoS Application-based QoSPort-based QoS Voice QoS Local Router Access Administration Tab ManagementRouter Password Remote Router AccessBackup and Restore 26 Backup & Restore ConfigurationAdministration Tab Log LogAdministration Tab Factory Defaults Factory DefaultsAdministration Tab Firmware Upgrade Upgrade FirmwareLine1 Status Status Tab VoiceInformation Line2 StatusStatus Tab Router 33 Status Tab RouterStatus Tab Local Network Local NetworkAppendix a Troubleshooting Common Problems and SolutionsFor Windows 98 and Millennium For WindowsNeed to set a static IP address on a PC For Windows XP Want to test my Internet connectionFor Windows Am not able to access the Router’s Web-based Utility Setup Need to set up a server behind my Router Application Start and End Protocol IP Address Enabled TCPCan’t get the Internet game, server, or application to work For Microsoft Internet Explorer 5.0 or higher To start over, I need to set the Router to factory defaultNeed to upgrade the firmware For Netscape 4.7 or higherFirmware upgrade failed My DSL service’s PPPoE is always disconnectingNeed to use port triggering Frequently Asked Questions If all else fails in the installation, what can I do? Does the Router support ICQ send file?How can I block corrupted FTP downloads? What is DMZ Hosting? Is the Router cross-platform compatible?How many ports can be simultaneously forwarded? Which modems are compatible with the Router? How can I check whether I have static or Dhcp IP addresses?How do I get mIRC to work with the Router? Figure B-1 Upgrade Firmware Appendix B Upgrading FirmwareWindows 98 or Me Instructions Windows 2000 or XP InstructionsFor the Router’s Web-based Utility Figure C-3 MAC Address/Physical AddressAppendix D Windows Help Shared ResourcesNetwork Neighborhood/My Network Places Appendix E Glossary Broadband Router with 2 Phone Ports Broadband Router with 2 Phone Ports Broadband Router with 2 Phone Ports Broadband Router with 2 Phone Ports Appendix F Specifications Storage Humidity Storage TempOperating Humidity 0ºC to 40ºC 32ºF to 104ºFAppendix G Warranty Information Limited WarrantyAppendix H Regulatory Information FCC StatementAppendix I Contact Information Need to contact Linksys?Information section in this Guide

RT31P2-NA specifications

The Linksys RT31P2-NA is a versatile voice-over-IP (VoIP) router designed to seamlessly combine internet connectivity with telephone services. Targeted at home users and small businesses, the device acts as a gateway through which users can connect multiple computers and internet-enabled devices while also facilitating digital phone services.

One of the standout features of the RT31P2-NA is its ability to support multiple voice lines, allowing users to make and receive calls while simultaneously using the internet. This dual functionality is made possible by its built-in VoIP capabilities, which leverage Session Initiation Protocol (SIP) technology, ensuring high-quality voice calls without interruptions from internet traffic.

In terms of connectivity, the router includes a standard Ethernet WAN port and four Ethernet LAN ports, providing ample options for wired connections to various devices. This setup is ideal for households or small offices that require stable, high-speed internet access across numerous devices. Additionally, the router features two telephone ports, allowing users to connect traditional analog phones directly for VoIP services.

Security is a key characteristic of the RT31P2-NA. It incorporates advanced security protocols such as WPA2 encryption and firewall capabilities to protect users' networks from unauthorized access and cyber threats. The router also supports Quality of Service (QoS) features, enabling users to prioritize bandwidth allocation for voice calls and other critical applications, ensuring minimal lag and superior call quality.

The design of the RT31P2-NA is user-friendly, with an intuitive interface that simplifies the setup process. The integrated configuration wizard helps users connect to their internet service and set up telephony services with ease. Furthermore, firmware updates can be easily managed, keeping the device secure and running optimally.

Moreover, Linksys is known for its reliable customer support and warranty services, which enhance the overall experience for users. The RT31P2-NA is a robust option for individuals and small businesses looking to streamline their communication needs while enjoying reliable internet connectivity. Whether for personal use or office applications, this router delivers a balanced mix of performance, functionality, and ease of use.
Top Page Image Contents