Linksys WRT54G3G-AT manual Static IP Connection Type

Page 28

Wireless-G Router for Mobile Broadband

•Static IP. If you are required to use a permanent IP address to connect to the Internet, select Static IP.

Internet IP Address. This is the Router’s IP address, when seen from the Internet. Your ISP will provide you with the IP Address you need to specify here.

Subnet Mask. This is the Router’s Subnet Mask, as seen by users on the Internet (including your ISP). Your ISP will provide you with the Subnet Mask.

Gateway. Your ISP will provide you with the Gateway Address, which is the ISP server’s IP address. DNS. Your ISP will provide you with at least one DNS (Domain Name System) Server IP Address.

•PPPoE. Some DSL-based ISPs use PPPoE (Point-to-Point Protocol over Ethernet) to establish Internet connections. If you are connected to the Internet through a DSL line, check with your ISP to see if they use PPPoE. If they do, you will have to enable PPPoE.

User Name and Password. Enter the User Name and Password provided by your ISP.

Connect on Demand: Max Idle Time. You can configure the Router to cut the Internet connection after it has been inactive for a specified period of time (Max Idle Time). If your Internet connection has been terminated due to inactivity, Connect on Demand enables the Router to automatically re-establish your connection as soon as you attempt to access the Internet again. If you wish to activate Connect on Demand, click the radio button. In the Max Idle Time field, enter the number of minutes you want to have elapsed before your Internet connection terminates.

Keep Alive Option: Redial Period. If you select this option, the Router will periodically check your Internet connection. If you are disconnected, then the Router will automatically re-establish your connection. To use this option, click the radio button next to Keep Alive. In the Redial Period field, you specify how often you want the Router to check the Internet connection. The default Redial Period is 30 seconds.

•PPTP. Point-to-Point Tunneling Protocol (PPTP) is a service that applies to connections in Europe only.

Internet IP Address. This is the Router’s IP address, as seen from the Internet. Your ISP will provide you with the IP Address you need to specify here.

Subnet Mask. This is the Router’s Subnet Mask, as seen by users on the Internet (including your ISP). Your ISP will provide you with the Subnet Mask.

Gateway. Your ISP will provide you with the Gateway Address.

User Name and Password. Enter the User Name and Password provided by your ISP.

Chapter 5: Configuring the Wireless-G Router for Mobile Broadband

Figure 5-4: Static IP Connection Type

Static IP address: a fixed address assigned to a computer or device connected to a network.

Figure 5-5: PPPoE Connection Type

Figure 5-6: PPTP Connection Type

19

The Setup Tab - Basic Setup

Page 27 Page 29
Image 28
Page 27 Page 29
Contents 802 GHz .11g Wireless- G Copyright and Trademarks How to Use This User GuideWord definition Table of Contents Appendix a Troubleshooting Appendix B Wireless SecurityCommon Problems and Solutions Frequently Asked Questions Appendix C Upgrading Firmware Appendix D Windows HelpList of Figures Router’s Ports17 Setup Tab Advanced Routing Gateway 51 Status Tab Local Network Wireless-G Router for Mobile Broadband Wireless-G Router for Mobile Broadband Introduction WelcomeWhat’s in this User Guide? Wireless-G Router for Mobile Broadband Planning Your Wireless Network Ad-Hoc versus Infrastructure ModeSsid service set identifier your wireless network’s name Network TopologyPlanning Your Wireless Network Network Layout Getting to Know the Wireless-G Router for Mobile Broadband Router’s PortsRouter’s LEDs Router’s LEDs are located on the Router’s other side panelRouter’s Data Card Slot Connecting the Wireless-G Router for Mobile Broadband OverviewConnect Your Computer Hardware Installation for Connection to Your Broadband Modem Connect the Power Hardware Installation for Connection to Another Router Diagram for Connection to Another RouterConnect Your Computer Placement Options Stand OptionWall-Mount Option 11 Measurement between Wall-Mount SlotsConfiguring the Wireless-G Router for Mobile Broadband Password ScreenSetup Tab Basic Setup Mobile Network SetupInternet Setup StatusStatic IP Connection Type Optional Settings L2TP Connection TypeNetwork Setup Dhcp Server SettingsNetwork Address Server Settings Dhcp Router IPTime Setting 12 Time SettingMobile Network Connection Mode Setup Tab Mobile NetworkAPN Configuration Mobile Network Status Data Card StatusDynDNS.org Setup Tab DdnsTZO.com Setup Tab MAC Address Clone MAC CloneSetup Tab Advanced Routing Advanced RoutingDynamic Routing Static RoutingWireless Tab Basic Wireless Settings Wireless NetworkWireless Tab Wireless Security Wireless SecurityAES 26 Wireless Tab Wireless Security Radius Wireless Tab Wireless MAC Filter Wireless MAC FilterWireless Tab Advanced Wireless Settings Advanced WirelessWireless-G Router for Mobile Broadband Firewall Security Tab FirewallBlock WAN Requests Access Restrictions Tab Internet Access Internet AccessTo create an Internet Access policy Security Tab VPN Passthrough34 Internet Policy Summary Applications and Gaming Tab Port Range Forward Port Range ForwardApplications & Gaming Tab Port Triggering Port TriggeringTriggered Range Forwarded RangeWired QoS Applications and Gaming Tab DMZApplications and Gaming Tab QoS Device PriorityEthernet Port Priority Wireless QoSApplication Priority Router Password Administration Tab ManagementUPnP Administration Tab Log LogPing Test Administration Tab DiagnosticsTraceroute Test Administration Tab Firmware Upgrade Administration Tab Factory DefaultsAdministration Tab Config Management Status Tab Mobile Network 49 Status Tab Mobile NetworkRouter Information Status Tab RouterInternet Status Tab Local Network Local NetworkStatus Tab Wireless WirelessCommon Problems and Solutions Appendix a TroubleshootingNeed to set a static IP address on a PC Wireless-G Router for Mobile Broadband Wireless-G Router for Mobile Broadband Application Start and End Protocol IP Address Enabled TCPCan’t get the Internet game, server, or application to work Need to upgrade the firmware To start over, I need to set the Router to factory defaultMy DSL service’s PPPoE is always disconnecting Power LED keeps flashing Frequently Asked Questions Where is the Router installed on the network?Is IPSec Pass-Through supported by the Router? Does the Router support IPX or AppleTalk?How will I be notified of new Router firmware upgrades? If all else fails in the installation, what can I do?How can I avoid corrupted FTP downloads? What is DMZ Hosting? What are the advanced features of the Router?Will the Router function in a Macintosh environment? Is the Router cross-platform compatible?What is the Ieee 802.11g standard? What is the Ieee 802.11b standard?What Ieee 802.11g features are supported? What Ieee 802.11b features are supported?What is infrastructure mode? What is roaming?What is ISM band? What is Spread Spectrum?What is DSSS? What is FHSS? And what are their differences? What is WEP?What is a MAC Address? How do I reset the Router?What do the indicator LEDs signify on the Router? How do I connect to the mobile network?How do I know which mobile network I am using? Whom should I call if there is a question or problem?Security Precautions Appendix B Wireless SecuritySecurity Threats Facing Wireless Networks Appendix B Wireless Security Wireless-G Router for Mobile Broadband Figure C-1 Upgrade Firmware Appendix C Upgrading FirmwareShared Resources Appendix D Windows HelpNetwork Neighborhood/My Network Places Windows 2000 or XP Instructions For the Router’s Web-based UtilityFigure E-4 MAC Address Filter List Appendix F Glossary Wireless-G Router for Mobile Broadband Wireless-G Router for Mobile Broadband Wireless-G Router for Mobile Broadband Wireless-G Router for Mobile Broadband Appendix G Specifications FCC, IC-03, CE, Wi-Fi 802.11b, 802.11g, WPA Appendix H Warranty Information Appendix I Regulatory Information Wireless-G Router for Mobile Broadband Wireless-G Router for Mobile Broadband Wireless-G Router for Mobile Broadband Wireless-G Router for Mobile Broadband Wireless-G Router for Mobile Broadband Wireless-G Router for Mobile Broadband

WRT54G3G-AT specifications

The Linksys WRT54G3G-AT is an advanced wireless router known for its versatility and robust performance in various networking environments. Designed particularly for users who require both wireless and mobile broadband connectivity, this device integrates several key features to cater to the needs of home users and small businesses alike.

One of the standout characteristics of the WRT54G3G-AT is its dual-connectivity option. It not only supports traditional broadband connections through DSL or cable but also offers 3G connectivity, making it ideal for users in areas where wired broadband options are limited or unreliable. With the ability to connect a compatible 3G USB modem, users can maintain internet access even during outages, ensuring continuous connectivity.

The WRT54G3G-AT utilizes the 802.11g wireless standard, providing speeds of up to 54 Mbps. This allows for efficient data transfer and seamless streaming, making it suitable for tasks such as online gaming and video conferencing. Its wireless range is optimized for both indoor and outdoor use, effectively covering medium-sized homes or office spaces without the need for additional access points.

Security is a crucial aspect of any networking device, and the WRT54G3G-AT incorporates advanced features to protect users' data. It supports security protocols such as WPA and WPA2, shielding against unauthorized access and ensuring that sensitive information remains secure. Additionally, the router offers a built-in firewall that adds another layer of protection against potential threats.

Another notable feature of the WRT54G3G-AT is its ease of installation and configuration. With a user-friendly web-based interface, even those with limited technical knowledge can set up the device without hassle. The installation process is streamlined, allowing users to quickly personalize their settings and connect their devices.

The router also includes a range of management tools, allowing users to monitor their network activity and optimize performance as needed. Quality of Service (QoS) settings enable users to prioritize bandwidth for specific applications, ensuring that critical tasks receive the necessary resources.

In summary, the Linksys WRT54G3G-AT is a powerful, flexible wireless router that combines traditional broadband functionality with mobile connectivity options. With robust performance features, security measures, and user-friendly management tools, it serves as an excellent choice for anyone seeking reliable internet access in a variety of environments.
Top Page Image Contents