Linksys WRT54G3G-AT manual Power LED keeps flashing

Page 65

Wireless-G Router for Mobile Broadband

6.You may see the login status display as Connecting. Press the F5 key to refresh the screen, until you see the login status display as Connected.

•Click the Save Settings button to continue.

•If the connection is lost again, follow steps 1- 6 to re-establish connection.

14.I can’t access my e-mail, web or I am getting corrupted data from the Internet.

The Maximum Transmission Unit (MTU) setting may need to be adjusted. By default, the MTU is set at 1500. For most DSL users, it is strongly recommended to use MTU 1492.

•If you are having some difficulties, perform the following steps:

1.To connect to the Router, go to the web browser, and enter http://192.168.1.1 or the IP address of the Router.

2.Enter the password, if asked. (The default password is admin.)

3.Look for the MTU option, and select Manual. In the Size field, enter 1492.

4.Click the Save Settings button to continue.

•If your difficulties continue, change the Size to different values. Try this list of values, one value at a time, in this order, until your problem is solved:

1462

1400

1362

1300

15.The Power LED keeps flashing.

The Power LED flashes when the device is first powered up. Meantime, the system will boot up itself and check for proper operation. After finishing the checking procedure, the LED stays solid to show that the system is working fine. If the LED keeps flashing after this time, the device is not working properly. Try to flash the firmware by assigning a static IP address to the computer, and then upgrade the firmware. Try using the following settings, IP Address: 192.168.1.50 and Subnet Mask: 255.255.255.0.

16.When I enter a URL or IP address, I get a time-out error or am prompted to retry.

•Check if other PCs work. If they do, ensure that your workstation’s IP settings are correct (IP Address, Subnet Mask, Default Gateway, and DNS). Restart the computer that is having a problem.

•If the PCs are configured correctly, but still not working, check the Router. Ensure that it is connected and powered on. Connect to it and check its settings. (If you cannot connect to it, check the LAN and power connections.)

•If the Router is configured correctly, check your Internet connection (DSL/cable modem, etc.) to see if it is working correctly. You can remove the Router to verify a direct connection.

•Manually configure the TCP/IP settings with a DNS address provided by your ISP.

•Make sure that your browser is set to connect directly and that any dial-up is disabled. For Internet Explorer, click Tools, Internet Options, and then the Connection tab. Make sure that Internet Explorer is set to Never dial a connection. For Netscape Navigator, click Edit, Preferences, Advanced, and Proxy. Make sure that Netscape Navigator is set to Direct connection to the Internet.

Appendix A: Troubleshooting

56

Common Problems and Solutions

Page 64 Page 66
Image 65
Page 64 Page 66
Contents 802 GHz .11g Wireless- G Word definition How to Use This User GuideCopyright and Trademarks Table of Contents Appendix B Wireless Security Appendix a TroubleshootingCommon Problems and Solutions Frequently Asked Questions Appendix C Upgrading Firmware Appendix D Windows HelpRouter’s Ports List of Figures17 Setup Tab Advanced Routing Gateway 51 Status Tab Local Network Wireless-G Router for Mobile Broadband Wireless-G Router for Mobile Broadband Welcome IntroductionWhat’s in this User Guide? Wireless-G Router for Mobile Broadband Ad-Hoc versus Infrastructure Mode Planning Your Wireless NetworkSsid service set identifier your wireless network’s name Network TopologyPlanning Your Wireless Network Network Layout Router’s Ports Getting to Know the Wireless-G Router for Mobile BroadbandRouter’s LEDs are located on the Router’s other side panel Router’s LEDsRouter’s Data Card Slot Overview Connecting the Wireless-G Router for Mobile BroadbandConnect Your Computer Hardware Installation for Connection to Your Broadband Modem Connect the Power Diagram for Connection to Another Router Hardware Installation for Connection to Another RouterConnect Your Computer Stand Option Placement Options11 Measurement between Wall-Mount Slots Wall-Mount OptionPassword Screen Configuring the Wireless-G Router for Mobile BroadbandMobile Network Setup Setup Tab Basic SetupInternet Setup StatusStatic IP Connection Type L2TP Connection Type Optional SettingsDhcp Server Settings Network SetupNetwork Address Server Settings Dhcp Router IP12 Time Setting Time SettingAPN Configuration Setup Tab Mobile NetworkMobile Network Connection Mode Data Card Status Mobile Network StatusTZO.com Setup Tab DdnsDynDNS.org MAC Clone Setup Tab MAC Address CloneAdvanced Routing Setup Tab Advanced RoutingDynamic Routing Static RoutingWireless Network Wireless Tab Basic Wireless SettingsWireless Security Wireless Tab Wireless SecurityAES 26 Wireless Tab Wireless Security Radius Wireless MAC Filter Wireless Tab Wireless MAC FilterAdvanced Wireless Wireless Tab Advanced Wireless SettingsWireless-G Router for Mobile Broadband Block WAN Requests Security Tab FirewallFirewall Internet Access Access Restrictions Tab Internet AccessTo create an Internet Access policy Security Tab VPN Passthrough34 Internet Policy Summary Port Range Forward Applications and Gaming Tab Port Range ForwardPort Triggering Applications & Gaming Tab Port TriggeringTriggered Range Forwarded RangeApplications and Gaming Tab DMZ Wired QoSApplications and Gaming Tab QoS Device PriorityApplication Priority Wireless QoSEthernet Port Priority UPnP Administration Tab ManagementRouter Password Log Administration Tab LogTraceroute Test Administration Tab DiagnosticsPing Test Administration Tab Config Management Administration Tab Factory DefaultsAdministration Tab Firmware Upgrade 49 Status Tab Mobile Network Status Tab Mobile NetworkInternet Status Tab RouterRouter Information Local Network Status Tab Local NetworkWireless Status Tab WirelessNeed to set a static IP address on a PC Appendix a TroubleshootingCommon Problems and Solutions Wireless-G Router for Mobile Broadband Wireless-G Router for Mobile Broadband TCP Application Start and End Protocol IP Address EnabledCan’t get the Internet game, server, or application to work My DSL service’s PPPoE is always disconnecting To start over, I need to set the Router to factory defaultNeed to upgrade the firmware Power LED keeps flashing Where is the Router installed on the network? Frequently Asked QuestionsIs IPSec Pass-Through supported by the Router? Does the Router support IPX or AppleTalk?How can I avoid corrupted FTP downloads? If all else fails in the installation, what can I do?How will I be notified of new Router firmware upgrades? What are the advanced features of the Router? What is DMZ Hosting?Will the Router function in a Macintosh environment? Is the Router cross-platform compatible?What is the Ieee 802.11b standard? What is the Ieee 802.11g standard?What Ieee 802.11g features are supported? What Ieee 802.11b features are supported?What is roaming? What is infrastructure mode?What is ISM band? What is Spread Spectrum?What is WEP? What is DSSS? What is FHSS? And what are their differences?What is a MAC Address? How do I reset the Router?How do I connect to the mobile network? What do the indicator LEDs signify on the Router?Whom should I call if there is a question or problem? How do I know which mobile network I am using?Security Threats Facing Wireless Networks Appendix B Wireless SecuritySecurity Precautions Appendix B Wireless Security Wireless-G Router for Mobile Broadband Appendix C Upgrading Firmware Figure C-1 Upgrade FirmwareNetwork Neighborhood/My Network Places Appendix D Windows HelpShared Resources For the Router’s Web-based Utility Windows 2000 or XP InstructionsFigure E-4 MAC Address Filter List Appendix F Glossary Wireless-G Router for Mobile Broadband Wireless-G Router for Mobile Broadband Wireless-G Router for Mobile Broadband Wireless-G Router for Mobile Broadband Appendix G Specifications FCC, IC-03, CE, Wi-Fi 802.11b, 802.11g, WPA Appendix H Warranty Information Appendix I Regulatory Information Wireless-G Router for Mobile Broadband Wireless-G Router for Mobile Broadband Wireless-G Router for Mobile Broadband Wireless-G Router for Mobile Broadband Wireless-G Router for Mobile Broadband Wireless-G Router for Mobile Broadband

WRT54G3G-AT specifications

The Linksys WRT54G3G-AT is an advanced wireless router known for its versatility and robust performance in various networking environments. Designed particularly for users who require both wireless and mobile broadband connectivity, this device integrates several key features to cater to the needs of home users and small businesses alike.

One of the standout characteristics of the WRT54G3G-AT is its dual-connectivity option. It not only supports traditional broadband connections through DSL or cable but also offers 3G connectivity, making it ideal for users in areas where wired broadband options are limited or unreliable. With the ability to connect a compatible 3G USB modem, users can maintain internet access even during outages, ensuring continuous connectivity.

The WRT54G3G-AT utilizes the 802.11g wireless standard, providing speeds of up to 54 Mbps. This allows for efficient data transfer and seamless streaming, making it suitable for tasks such as online gaming and video conferencing. Its wireless range is optimized for both indoor and outdoor use, effectively covering medium-sized homes or office spaces without the need for additional access points.

Security is a crucial aspect of any networking device, and the WRT54G3G-AT incorporates advanced features to protect users' data. It supports security protocols such as WPA and WPA2, shielding against unauthorized access and ensuring that sensitive information remains secure. Additionally, the router offers a built-in firewall that adds another layer of protection against potential threats.

Another notable feature of the WRT54G3G-AT is its ease of installation and configuration. With a user-friendly web-based interface, even those with limited technical knowledge can set up the device without hassle. The installation process is streamlined, allowing users to quickly personalize their settings and connect their devices.

The router also includes a range of management tools, allowing users to monitor their network activity and optimize performance as needed. Quality of Service (QoS) settings enable users to prioritize bandwidth for specific applications, ensuring that critical tasks receive the necessary resources.

In summary, the Linksys WRT54G3G-AT is a powerful, flexible wireless router that combines traditional broadband functionality with mobile connectivity options. With robust performance features, security measures, and user-friendly management tools, it serves as an excellent choice for anyone seeking reliable internet access in a variety of environments.
Top Page Image Contents