Linksys WRT54G3G-AT Can the Router act as my Dhcp server?, What is the Ieee 802.11g standard?

Page 69

Wireless-G Router for Mobile Broadband

Under the Port Forwarding tab, set port forwarding to 113 for the PC on which you are using mIRC.

Can the Router act as my DHCP server?

Yes. The Router has DHCP server software built-in.

Can I run an application from a remote computer over the wireless network?

This will depend on whether or not the application is designed to be used over a network. Consult the application’s documentation to determine if it supports operation over a network.

What is the IEEE 802.11g standard?

It is one of the IEEE standards for wireless networks. The 802.11g standard allows wireless networking hardware from different manufacturers to communicate, provided that the hardware complies with the 802.11g standard. The 802.11g standard states a maximum data transfer rate of 54Mbps and an operating frequency of 2.4GHz.

What is the IEEE 802.11b standard?

It is one of the IEEE standards for wireless networks. The 802.11b standard allows wireless networking hardware from different manufacturers to communicate, provided that the hardware complies with the 802.11b standard. The 802.11b standard states a maximum data transfer rate of 11Mbps and an operating frequency of 2.4GHz.

What IEEE 802.11g features are supported?

The product supports the following IEEE 802.11g functions:

•CSMA/CA plus Acknowledge protocol

•OFDM protocol

•Multi-Channel Roaming

•Automatic Rate Selection

•RTS/CTS feature

•Fragmentation

•Power Management

What IEEE 802.11b features are supported?

The product supports the following IEEE 802.11b functions:

•CSMA/CA plus Acknowledge protocol

•Multi-Channel Roaming

•Automatic Rate Selection

•RTS/CTS feature

•Fragmentation

•Power Management

What is ad-hoc mode?

Appendix A: Troubleshooting

60

Frequently Asked Questions

Page 68 Page 70
Image 69
Page 68 Page 70
Contents 802 GHz .11g Wireless- G How to Use This User Guide Copyright and TrademarksWord definition Table of Contents Appendix B Wireless Security Appendix a TroubleshootingCommon Problems and Solutions Frequently Asked Questions Appendix C Upgrading Firmware Appendix D Windows HelpRouter’s Ports List of Figures17 Setup Tab Advanced Routing Gateway 51 Status Tab Local Network Wireless-G Router for Mobile Broadband Wireless-G Router for Mobile Broadband Welcome IntroductionWhat’s in this User Guide? Wireless-G Router for Mobile Broadband Ad-Hoc versus Infrastructure Mode Planning Your Wireless NetworkSsid service set identifier your wireless network’s name Network TopologyPlanning Your Wireless Network Network Layout Router’s Ports Getting to Know the Wireless-G Router for Mobile BroadbandRouter’s LEDs are located on the Router’s other side panel Router’s LEDsRouter’s Data Card Slot Overview Connecting the Wireless-G Router for Mobile BroadbandConnect Your Computer Hardware Installation for Connection to Your Broadband Modem Connect the Power Diagram for Connection to Another Router Hardware Installation for Connection to Another RouterConnect Your Computer Stand Option Placement Options11 Measurement between Wall-Mount Slots Wall-Mount OptionPassword Screen Configuring the Wireless-G Router for Mobile BroadbandMobile Network Setup Setup Tab Basic SetupInternet Setup StatusStatic IP Connection Type L2TP Connection Type Optional SettingsDhcp Server Settings Network SetupNetwork Address Server Settings Dhcp Router IP12 Time Setting Time SettingSetup Tab Mobile Network Mobile Network Connection ModeAPN Configuration Data Card Status Mobile Network StatusSetup Tab Ddns DynDNS.orgTZO.com MAC Clone Setup Tab MAC Address CloneAdvanced Routing Setup Tab Advanced RoutingDynamic Routing Static RoutingWireless Network Wireless Tab Basic Wireless SettingsWireless Security Wireless Tab Wireless SecurityAES 26 Wireless Tab Wireless Security Radius Wireless MAC Filter Wireless Tab Wireless MAC FilterAdvanced Wireless Wireless Tab Advanced Wireless SettingsWireless-G Router for Mobile Broadband Security Tab Firewall FirewallBlock WAN Requests Internet Access Access Restrictions Tab Internet AccessTo create an Internet Access policy Security Tab VPN Passthrough34 Internet Policy Summary Port Range Forward Applications and Gaming Tab Port Range ForwardPort Triggering Applications & Gaming Tab Port TriggeringTriggered Range Forwarded RangeApplications and Gaming Tab DMZ Wired QoSApplications and Gaming Tab QoS Device PriorityWireless QoS Ethernet Port PriorityApplication Priority Administration Tab Management Router PasswordUPnP Log Administration Tab LogAdministration Tab Diagnostics Ping TestTraceroute Test Administration Tab Factory Defaults Administration Tab Firmware UpgradeAdministration Tab Config Management 49 Status Tab Mobile Network Status Tab Mobile NetworkStatus Tab Router Router InformationInternet Local Network Status Tab Local NetworkWireless Status Tab WirelessAppendix a Troubleshooting Common Problems and SolutionsNeed to set a static IP address on a PC Wireless-G Router for Mobile Broadband Wireless-G Router for Mobile Broadband TCP Application Start and End Protocol IP Address EnabledCan’t get the Internet game, server, or application to work To start over, I need to set the Router to factory default Need to upgrade the firmwareMy DSL service’s PPPoE is always disconnecting Power LED keeps flashing Where is the Router installed on the network? Frequently Asked QuestionsIs IPSec Pass-Through supported by the Router? Does the Router support IPX or AppleTalk?If all else fails in the installation, what can I do? How will I be notified of new Router firmware upgrades?How can I avoid corrupted FTP downloads? What are the advanced features of the Router? What is DMZ Hosting?Will the Router function in a Macintosh environment? Is the Router cross-platform compatible?What is the Ieee 802.11b standard? What is the Ieee 802.11g standard?What Ieee 802.11g features are supported? What Ieee 802.11b features are supported?What is roaming? What is infrastructure mode?What is ISM band? What is Spread Spectrum?What is WEP? What is DSSS? What is FHSS? And what are their differences?What is a MAC Address? How do I reset the Router?How do I connect to the mobile network? What do the indicator LEDs signify on the Router?Whom should I call if there is a question or problem? How do I know which mobile network I am using?Appendix B Wireless Security Security PrecautionsSecurity Threats Facing Wireless Networks Appendix B Wireless Security Wireless-G Router for Mobile Broadband Appendix C Upgrading Firmware Figure C-1 Upgrade FirmwareAppendix D Windows Help Shared ResourcesNetwork Neighborhood/My Network Places For the Router’s Web-based Utility Windows 2000 or XP InstructionsFigure E-4 MAC Address Filter List Appendix F Glossary Wireless-G Router for Mobile Broadband Wireless-G Router for Mobile Broadband Wireless-G Router for Mobile Broadband Wireless-G Router for Mobile Broadband Appendix G Specifications FCC, IC-03, CE, Wi-Fi 802.11b, 802.11g, WPA Appendix H Warranty Information Appendix I Regulatory Information Wireless-G Router for Mobile Broadband Wireless-G Router for Mobile Broadband Wireless-G Router for Mobile Broadband Wireless-G Router for Mobile Broadband Wireless-G Router for Mobile Broadband Wireless-G Router for Mobile Broadband

WRT54G3G-AT specifications

The Linksys WRT54G3G-AT is an advanced wireless router known for its versatility and robust performance in various networking environments. Designed particularly for users who require both wireless and mobile broadband connectivity, this device integrates several key features to cater to the needs of home users and small businesses alike.

One of the standout characteristics of the WRT54G3G-AT is its dual-connectivity option. It not only supports traditional broadband connections through DSL or cable but also offers 3G connectivity, making it ideal for users in areas where wired broadband options are limited or unreliable. With the ability to connect a compatible 3G USB modem, users can maintain internet access even during outages, ensuring continuous connectivity.

The WRT54G3G-AT utilizes the 802.11g wireless standard, providing speeds of up to 54 Mbps. This allows for efficient data transfer and seamless streaming, making it suitable for tasks such as online gaming and video conferencing. Its wireless range is optimized for both indoor and outdoor use, effectively covering medium-sized homes or office spaces without the need for additional access points.

Security is a crucial aspect of any networking device, and the WRT54G3G-AT incorporates advanced features to protect users' data. It supports security protocols such as WPA and WPA2, shielding against unauthorized access and ensuring that sensitive information remains secure. Additionally, the router offers a built-in firewall that adds another layer of protection against potential threats.

Another notable feature of the WRT54G3G-AT is its ease of installation and configuration. With a user-friendly web-based interface, even those with limited technical knowledge can set up the device without hassle. The installation process is streamlined, allowing users to quickly personalize their settings and connect their devices.

The router also includes a range of management tools, allowing users to monitor their network activity and optimize performance as needed. Quality of Service (QoS) settings enable users to prioritize bandwidth for specific applications, ensuring that critical tasks receive the necessary resources.

In summary, the Linksys WRT54G3G-AT is a powerful, flexible wireless router that combines traditional broadband functionality with mobile connectivity options. With robust performance features, security measures, and user-friendly management tools, it serves as an excellent choice for anyone seeking reliable internet access in a variety of environments.
Top Page Image Contents