Linksys WRT54G3G-AT manual Application Start and End Protocol IP Address Enabled, Tcp

Page 62

Wireless-G Router for Mobile Broadband

5.Enter the IP address of the PC or network device that you want the port server to go to. For example, if the web server’s Ethernet adapter IP address is 192.168.1.100, you would enter 100 in the field provided. Check “Appendix E: Finding the MAC Address and IP Address for Your Ethernet Adapter” for details on getting an IP address.

6.Check the Enable option for the port services you want to use. Consider the example below:

Application

Start and End

Protocol

IP Address

Enabled

 

 

 

 

 

Web server

80 to 80

Both

192.168.1.100

X

 

 

 

 

 

FTP server

21 to 21

TCP

192.168.1.101

X

 

 

 

 

 

SMTP (outgoing)

25 to 25

Both

192.168.1.102

X

 

 

 

 

 

POP3 (incoming)

110 to 110

Both

192.168.1.102

X

 

 

 

 

 

When you have completed the configuration, click the Save Settings button.

7.I need to set up online game hosting or use other Internet applications.

If you want to play online games or use Internet applications, most will work without doing any port forwarding or DMZ hosting. There may be cases when you want to host an online game or Internet application. This would require you to set up the Router to deliver incoming packets or data to a specific computer. This also applies to the Internet applications you are using. The best way to get the information on what port services to use is to go to the website of the online game or application you want to use. Follow these steps to set up online game hosting or use a certain Internet application:

1.Access the Router’s web interface by going to http://192.168.1.1 or the IP address of the Router. Go to the Applications & Gaming => Port Range Forward tab.

2.Enter any name you want to use for the Application.

3.Enter the Start and End Port range of the service you are using. For example, if you want to host Unreal Tournament (UT), you would enter the range 7777 to 27900.

4.Select the protocol(s) you will be using, TCP and/or UDP.

5.Enter the IP address of the PC or network device that you want the port server to go to. For example, if the web server’s Ethernet adapter IP address is 192.168.1.100, you would enter 100 in the field provided. Check “Appendix E: Finding the MAC Address and IP Address for Your Ethernet Adapter” for details on getting an IP address.

6.Check the Enable option for the port services you want to use. Consider the example below:

 

Application

Start and End

Protocol

IP Address

Enabled

 

 

 

 

 

 

 

 

 

UT

7777 to 27900

Both

192.168.1.100

X

 

 

 

 

 

 

 

 

Appendix A: Troubleshooting

 

 

 

53

Common Problems and Solutions

Page 61 Page 63
Image 62
Page 61 Page 63
Contents 802 GHz .11g Wireless- G Word definition How to Use This User GuideCopyright and Trademarks Table of Contents Common Problems and Solutions Frequently Asked Questions Appendix a TroubleshootingAppendix B Wireless Security Appendix C Upgrading Firmware Appendix D Windows HelpList of Figures Router’s Ports17 Setup Tab Advanced Routing Gateway 51 Status Tab Local Network Wireless-G Router for Mobile Broadband Wireless-G Router for Mobile Broadband Introduction WelcomeWhat’s in this User Guide? Wireless-G Router for Mobile Broadband Ssid service set identifier your wireless network’s name Planning Your Wireless NetworkAd-Hoc versus Infrastructure Mode Network TopologyPlanning Your Wireless Network Network Layout Getting to Know the Wireless-G Router for Mobile Broadband Router’s PortsRouter’s LEDs Router’s LEDs are located on the Router’s other side panelRouter’s Data Card Slot Connecting the Wireless-G Router for Mobile Broadband OverviewConnect Your Computer Hardware Installation for Connection to Your Broadband Modem Connect the Power Hardware Installation for Connection to Another Router Diagram for Connection to Another RouterConnect Your Computer Placement Options Stand OptionWall-Mount Option 11 Measurement between Wall-Mount SlotsConfiguring the Wireless-G Router for Mobile Broadband Password ScreenInternet Setup Setup Tab Basic SetupMobile Network Setup StatusStatic IP Connection Type Optional Settings L2TP Connection TypeNetwork Address Server Settings Dhcp Network SetupDhcp Server Settings Router IPTime Setting 12 Time SettingAPN Configuration Setup Tab Mobile NetworkMobile Network Connection Mode Mobile Network Status Data Card StatusTZO.com Setup Tab DdnsDynDNS.org Setup Tab MAC Address Clone MAC CloneDynamic Routing Setup Tab Advanced RoutingAdvanced Routing Static RoutingWireless Tab Basic Wireless Settings Wireless NetworkWireless Tab Wireless Security Wireless SecurityAES 26 Wireless Tab Wireless Security Radius Wireless Tab Wireless MAC Filter Wireless MAC FilterWireless Tab Advanced Wireless Settings Advanced WirelessWireless-G Router for Mobile Broadband Block WAN Requests Security Tab FirewallFirewall To create an Internet Access policy Access Restrictions Tab Internet AccessInternet Access Security Tab VPN Passthrough34 Internet Policy Summary Applications and Gaming Tab Port Range Forward Port Range ForwardTriggered Range Applications & Gaming Tab Port TriggeringPort Triggering Forwarded RangeApplications and Gaming Tab QoS Wired QoSApplications and Gaming Tab DMZ Device PriorityApplication Priority Wireless QoSEthernet Port Priority UPnP Administration Tab ManagementRouter Password Administration Tab Log LogTraceroute Test Administration Tab DiagnosticsPing Test Administration Tab Config Management Administration Tab Factory DefaultsAdministration Tab Firmware Upgrade Status Tab Mobile Network 49 Status Tab Mobile NetworkInternet Status Tab RouterRouter Information Status Tab Local Network Local NetworkStatus Tab Wireless WirelessNeed to set a static IP address on a PC Appendix a TroubleshootingCommon Problems and Solutions Wireless-G Router for Mobile Broadband Wireless-G Router for Mobile Broadband Application Start and End Protocol IP Address Enabled TCPCan’t get the Internet game, server, or application to work My DSL service’s PPPoE is always disconnecting To start over, I need to set the Router to factory defaultNeed to upgrade the firmware Power LED keeps flashing Is IPSec Pass-Through supported by the Router? Frequently Asked QuestionsWhere is the Router installed on the network? Does the Router support IPX or AppleTalk?How can I avoid corrupted FTP downloads? If all else fails in the installation, what can I do?How will I be notified of new Router firmware upgrades? Will the Router function in a Macintosh environment? What is DMZ Hosting?What are the advanced features of the Router? Is the Router cross-platform compatible?What Ieee 802.11g features are supported? What is the Ieee 802.11g standard?What is the Ieee 802.11b standard? What Ieee 802.11b features are supported?What is ISM band? What is infrastructure mode?What is roaming? What is Spread Spectrum?What is a MAC Address? What is DSSS? What is FHSS? And what are their differences?What is WEP? How do I reset the Router?What do the indicator LEDs signify on the Router? How do I connect to the mobile network?How do I know which mobile network I am using? Whom should I call if there is a question or problem?Security Threats Facing Wireless Networks Appendix B Wireless SecuritySecurity Precautions Appendix B Wireless Security Wireless-G Router for Mobile Broadband Figure C-1 Upgrade Firmware Appendix C Upgrading FirmwareNetwork Neighborhood/My Network Places Appendix D Windows HelpShared Resources Windows 2000 or XP Instructions For the Router’s Web-based UtilityFigure E-4 MAC Address Filter List Appendix F Glossary Wireless-G Router for Mobile Broadband Wireless-G Router for Mobile Broadband Wireless-G Router for Mobile Broadband Wireless-G Router for Mobile Broadband Appendix G Specifications FCC, IC-03, CE, Wi-Fi 802.11b, 802.11g, WPA Appendix H Warranty Information Appendix I Regulatory Information Wireless-G Router for Mobile Broadband Wireless-G Router for Mobile Broadband Wireless-G Router for Mobile Broadband Wireless-G Router for Mobile Broadband Wireless-G Router for Mobile Broadband Wireless-G Router for Mobile Broadband

WRT54G3G-AT specifications

The Linksys WRT54G3G-AT is an advanced wireless router known for its versatility and robust performance in various networking environments. Designed particularly for users who require both wireless and mobile broadband connectivity, this device integrates several key features to cater to the needs of home users and small businesses alike.

One of the standout characteristics of the WRT54G3G-AT is its dual-connectivity option. It not only supports traditional broadband connections through DSL or cable but also offers 3G connectivity, making it ideal for users in areas where wired broadband options are limited or unreliable. With the ability to connect a compatible 3G USB modem, users can maintain internet access even during outages, ensuring continuous connectivity.

The WRT54G3G-AT utilizes the 802.11g wireless standard, providing speeds of up to 54 Mbps. This allows for efficient data transfer and seamless streaming, making it suitable for tasks such as online gaming and video conferencing. Its wireless range is optimized for both indoor and outdoor use, effectively covering medium-sized homes or office spaces without the need for additional access points.

Security is a crucial aspect of any networking device, and the WRT54G3G-AT incorporates advanced features to protect users' data. It supports security protocols such as WPA and WPA2, shielding against unauthorized access and ensuring that sensitive information remains secure. Additionally, the router offers a built-in firewall that adds another layer of protection against potential threats.

Another notable feature of the WRT54G3G-AT is its ease of installation and configuration. With a user-friendly web-based interface, even those with limited technical knowledge can set up the device without hassle. The installation process is streamlined, allowing users to quickly personalize their settings and connect their devices.

The router also includes a range of management tools, allowing users to monitor their network activity and optimize performance as needed. Quality of Service (QoS) settings enable users to prioritize bandwidth for specific applications, ensuring that critical tasks receive the necessary resources.

In summary, the Linksys WRT54G3G-AT is a powerful, flexible wireless router that combines traditional broadband functionality with mobile connectivity options. With robust performance features, security measures, and user-friendly management tools, it serves as an excellent choice for anyone seeking reliable internet access in a variety of environments.
Top Page Image Contents