Linksys WRH54G manual Front Panel, Router’s LEDs are located on the front panel

Wireless-G Home Router

The Front Panel

The Router’s LEDs are located on the front panel.

Figure 3-2: The Router’s Front Panel

Power	Green. The Power LED lights up and will stay on while the Router is powered on. When the
	Router goes through its self-diagnostic mode during every boot-up, this LED will flash. When
	the diagnostic is complete, the LED will be solidly lit.
1, 2, 3, 4	Green. These numbered LEDs, corresponding with the numbered ports on the Router’s back
	panel, serve two purposes. If the LED is continuously lit, the Router is successfully connected
	to a device through that port. A flashing LED indicates network activity over that port.
Wireless	Green. The Wireless LED lights up whenever there is a successful wireless connection. If the
	LED is flashing, the Router is actively sending or receiving data over the network.
Internet	Green. The Internet LED lights up when there is a connection made through the Internet port.

Chapter 3: Getting to Know the Wireless-G Home Router

NOTE: SecureEasySetup is a feature that makes it easy to set up your wireless network. If you have SecureEasySetup devices, run the Router’s Setup Wizard CD-ROM and follow the on-screen instructions to use SecureEasySetup.

7

The Front Panel