Linksys WRH54G manual What is Network Address Translation and what is it used for?

Page 62

Wireless-G Home Router

Does the Internet connection of the Router support 100Mbps Ethernet?

The Router’s current hardware design supports up to 100Mbps Ethernet on its Internet port; however, the Internet connection speed will vary depending on the speed of your broadband connection. The Router also supports 100Mbps over the auto-sensing Fast Ethernet 10/100 switch on the LAN side of the Router.

What is Network Address Translation and what is it used for?

Network Address Translation (NAT) translates multiple IP addresses on the private LAN to one public address that is sent out to the Internet. This adds a level of security since the address of a PC connected to the private LAN is never transmitted on the Internet. Furthermore, NAT allows the Router to be used with low cost Internet accounts, such as DSL or cable modems, when only one TCP/IP address is provided by the ISP. The user may have many private addresses behind this single address provided by the ISP.

Does the Router support any operating system other than Windows 98SE, Windows Millennium,

Windows 2000, or Windows XP?

Yes, but Linksys does not, at this time, provide technical support for setup, configuration or troubleshooting of any non-Windows operating systems.

Does the Router support ICQ send file?

Yes, with the following fix: click ICQ menu -> preference -> connections tab->, and check I am behind a firewall or proxy. Then set the firewall time-out to 80 seconds in the firewall setting. The Internet user can then send a file to a user behind the Router.

I set up an Unreal Tournament Server, but others on the LAN cannot join. What do I need to do?

If you have a dedicated Unreal Tournament server running, you need to create a static IP for each of the LAN computers and forward ports 7777, 7778, 7779, 7780, 7781, and 27900 to the IP address of the server. You can also use a port forwarding range of 7777 ~ 27900. If you want to use the UT Server Admin, forward another port. (Port 8080 usually works well but is used for remote admin. You may have to disable this.) Then in the [UWeb.WebServer] section of the server.ini file, set the ListenPort to 8080 (to match the mapped port above) and ServerName to the IP assigned to the Router from your ISP.

Can multiple gamers on the LAN get on one game server and play simultaneously with just one public IP address?

It depends on which network game or what kind of game server you are using. For example, Unreal Tournament supports multi-login with one public IP.

How do I get Half-Life: Team Fortress to work with the Router?

The default client port for Half-Life is 27005. The computers on your LAN need to have “+clientport 2700x” added to the HL shortcut command line; the x would be 6, 7, 8, and on up. This lets multiple computers connect to the same server. One problem: Version 1.0.1.6 won’t let multiple computers with the same CD key connect at

Appendix A: Troubleshooting

55

Frequently Asked Questions

Page 61 Page 63
Image 62
Page 61 Page 63
Contents Wireless- G Copyright and Trademarks Word definitionTable of Contents Appendix C Upgrading Firmware Appendix D Windows Help Appendix a TroubleshootingAppendix B Wireless Security List of Figures Router’s Back Panel23 Wireless Tab Wireless Security Radius Figure E-1 IP Configuration Screen Introduction WelcomeWhat’s in this User Guide? Wireless-G Home Router Ssid service set identifier your wireless network’s name Planning Your Wireless NetworkAd-Hoc versus Infrastructure Mode Network TopologyPlanning Your Wireless Network Network Layout Getting to Know the Wireless-G Home Router Back PanelFront Panel Router’s LEDs are located on the front panelConnecting the Wireless-G Home Router OverviewConnecting Your Network Devices Hardware Installation for Connection to Another Router Connecting Another RouterConnecting Your Network Devices Configuring the Wireless-G Home Router Welcome ScreenSetup Tab Basic Setup Internet SetupPPPoE Connection Type Optional Settings Network Setup Time Setting Setup Tab Ddns DdnsSetup Tab MAC Address Clone TZO.comSetup Tab Advanced Routing 15 Setup Tab Advanced Routing RouterSetup Tab WAN Port Configure Wireless Tab Basic Wireless SettingsWireless Tab Wireless Security 19 Wireless Tab Wireless Security WPA Personal22 Wireless Tab Wireless Security WPA2 Enterprise 23 Wireless Tab Wireless Security Radius Wireless Tab MAC Filtering 25 Wireless Tab Wireless MAC FilterWireless Tab Advanced Wireless Settings Severely decrease performanceWireless-G Home Router Security Tab Firewall Additional FiltersSecurity Tab VPN Passthrough Security Tab ARPAccess Restrictions Tab Internet Access 31 Access Restrictions Tab Internet Access34 Port Services Applications and Gaming Tab Single Port Forward 35 Single Port ForwardWireless-G Home Router Applications and Gaming Tab Port Range Forward 36 Applications and Gaming Tab Port Range ForwardApplications & Gaming Tab Port Triggering Triggered RangeApplications and Gaming Tab UPnP 38 Applications and Gaming Tab UPnPApplications and Gaming Tab DMZ 39 Applications and Gaming Tab DMZAdministration Tab Management Administration Tab LogAdministration Tab Diagnostics 43 Administration Tab Diagnostics45 The Traceroute Test Administration Tab Config Management Administration Tab Factory DefaultsAdministration Tab Firmware Upgrade Administration Tab Reboot Status Tab RouterStatus Tab Local Network 52 Status Tab Local NetworkStatus Tab Traffic Statistics 54 Traffic StatisticsStatus Tab Wireless 55 Status Tab WirelessNeed to set a static IP address on a PC Appendix a TroubleshootingCommon Problems and Solutions Wireless-G Home Router Open a command prompt. For Windows 98SE and Me Application Start and End Protocol IP Address Enabled Can’t get the Internet game, server, or application to work Wireless-G Home Router Firmware upgrade failed, and/or the Power LED is flashing To start over, I need to set the Router to factory default Need to upgrade the firmware My DSL service’s PPPoE is always disconnectingPower LED keeps flashing Where is the Router installed on the network? Frequently Asked QuestionsWhere is my SecureEasySetup button? Is IPSec Pass-Through supported by the Router?What is Network Address Translation and what is it used for? Does the Router support ICQ send file?How can I block corrupted FTP downloads? What is the Ieee 802.11g standard? What is DMZ Hosting?What are the advanced features of the Router? Is the Router cross-platform compatible?What Ieee 802.11b features are supported? What is the Ieee 802.11b standard?What Ieee 802.11g features are supported? What is ad-hoc mode?What is DSSS? What is FHSS? And what are their differences? What is ISM band?What is Spread Spectrum? How do I reset the Router? What is WEP?What is a MAC Address? How do I resolve issues with signal loss?Security Threats Facing Wireless Networks Appendix B Wireless SecuritySecurity Precautions Appendix B Wireless Security Wireless-G Home Router Figure C-1 Upgrade Firmware Appendix C Upgrading FirmwareAppendix D Windows Help TCP/IPWindows 98SE or Me Instructions Windows 2000 or XP InstructionsFor the Router’s Web-based Utility Figure E-4 MAC Address Filter ListAppendix F Glossary Wireless-G Home Router Wireless-G Home Router Wireless-G Home Router Wireless-G Home Router Appendix G Specifications WRH54GFCC Appendix H Warranty Information Limited WarrantyAppendix I Regulatory Information Wireless-G Home Router Wireless-G Home Router Wireless-G Home Router Wireless-G Home Router Wireless-G Easy Router Appendix J Contact Information
Top Page Image Contents