Linksys WRH54G manual Open a command prompt. For Windows 98SE and Me

Page 55

Wireless-G Home Router

BOpen a command prompt. For Windows 98SE and Me:

• Click Start and Run. In the Open field, type command. Press the Enter key or click the OK button. For Windows 2000 and XP:

• Click Start and Run. In the Open field, type cmd. Press the Enter key or click the OK button. In the command prompt, type ping 192.168.1.1 and press the Enter key.

• If you get a reply, the computer is communicating with the Router.

• If you do NOT get a reply, please check the cable, and make sure Obtain an IP address automatically is selected in the TCP/IP settings for your Ethernet adapter.

CIn the command prompt, type ping followed by your Internet or WAN IP address and press the Enter key. The Internet or WAN IP Address can be found on the Status screen of the Router’s web-based utility. For example, if your Internet or WAN IP address is 1.2.3.4, you would enter ping 1.2.3.4 and press the Enter key.

• If you get a reply, the computer is connected to the Router.

• If you do NOT get a reply, try the ping command from a different computer to verify that your original computer is not the cause of the problem.

DIn the command prompt, type ping www.yahoo.com and press the Enter key.

•If you get a reply, the computer is connected to the Internet. If you cannot open a webpage, try the ping command from a different computer to verify that your original computer is not the cause of the problem.

•If you do NOT get a reply, there may be a problem with the connection. Try the ping command from a different computer to verify that your original computer is not the cause of the problem.

4.I am not getting an IP address on the Internet with my Internet connection.

•Refer to “Problem #3, I want to test my Internet connection” to verify that you have connectivity.

•If you need to register the MAC address of your Ethernet adapter with your ISP, please see “Appendix E: Finding the MAC address and IP Address for Your Ethernet Adapter.” If you need to clone the MAC address of your Ethernet adapter onto the Router, see the System section of “Chapter 6: Configuring the Wireless-G Home Router” for details.

•Make sure you are using the right Internet connection settings. Contact your ISP to see if your Internet connection type is DHCP, Static IP Address, or PPPoE (commonly used by DSL consumers). Please refer to the Setup section of “Chapter 6: Configuring the Wireless-G Home Router” for details on Internet connection settings.

•Make sure you have the right cable. Check to see if the Internet column has a solidly lit Link/Act LED.

•Make sure the cable connecting from your cable or DSL modem is connected to the Router’s Internet port. Verify that the Status page of the Router’s web-based utility shows a valid IP address from your ISP.

•Turn off the computer, Router, and cable/DSL modem. Wait 30 seconds, and then turn on the Router, cable/DSL modem, and computer. Check the Status tab of the Router’s web-based utility to see if you get an IP address.

Appendix A: Troubleshooting

48

Common Problems and Solutions

Page 54 Page 56
Image 55
Page 54 Page 56
Contents Wireless- G Word definition Copyright and TrademarksTable of Contents Appendix B Wireless Security Appendix a TroubleshootingAppendix C Upgrading Firmware Appendix D Windows Help Router’s Back Panel List of Figures23 Wireless Tab Wireless Security Radius Figure E-1 IP Configuration Screen Welcome IntroductionWhat’s in this User Guide? Wireless-G Home Router Network Topology Planning Your Wireless NetworkAd-Hoc versus Infrastructure Mode Ssid service set identifier your wireless network’s namePlanning Your Wireless Network Network Layout Back Panel Getting to Know the Wireless-G Home RouterRouter’s LEDs are located on the front panel Front PanelOverview Connecting the Wireless-G Home RouterConnecting Your Network Devices Connecting Another Router Hardware Installation for Connection to Another RouterConnecting Your Network Devices Welcome Screen Configuring the Wireless-G Home RouterInternet Setup Setup Tab Basic SetupPPPoE Connection Type Optional Settings Network Setup Time Setting Ddns Setup Tab DdnsTZO.com Setup Tab MAC Address Clone15 Setup Tab Advanced Routing Router Setup Tab Advanced RoutingWireless Tab Basic Wireless Settings Setup Tab WAN Port Configure19 Wireless Tab Wireless Security WPA Personal Wireless Tab Wireless Security22 Wireless Tab Wireless Security WPA2 Enterprise 23 Wireless Tab Wireless Security Radius 25 Wireless Tab Wireless MAC Filter Wireless Tab MAC FilteringSeverely decrease performance Wireless Tab Advanced Wireless SettingsWireless-G Home Router Additional Filters Security Tab FirewallSecurity Tab ARP Security Tab VPN Passthrough31 Access Restrictions Tab Internet Access Access Restrictions Tab Internet Access34 Port Services 35 Single Port Forward Applications and Gaming Tab Single Port ForwardWireless-G Home Router 36 Applications and Gaming Tab Port Range Forward Applications and Gaming Tab Port Range ForwardTriggered Range Applications & Gaming Tab Port Triggering38 Applications and Gaming Tab UPnP Applications and Gaming Tab UPnP39 Applications and Gaming Tab DMZ Applications and Gaming Tab DMZAdministration Tab Log Administration Tab Management43 Administration Tab Diagnostics Administration Tab Diagnostics45 The Traceroute Test Administration Tab Firmware Upgrade Administration Tab Factory DefaultsAdministration Tab Config Management Status Tab Router Administration Tab Reboot52 Status Tab Local Network Status Tab Local Network54 Traffic Statistics Status Tab Traffic Statistics55 Status Tab Wireless Status Tab WirelessCommon Problems and Solutions Appendix a TroubleshootingNeed to set a static IP address on a PC Wireless-G Home Router Open a command prompt. For Windows 98SE and Me Application Start and End Protocol IP Address Enabled Can’t get the Internet game, server, or application to work Wireless-G Home Router My DSL service’s PPPoE is always disconnecting To start over, I need to set the Router to factory defaultNeed to upgrade the firmware Firmware upgrade failed, and/or the Power LED is flashingPower LED keeps flashing Is IPSec Pass-Through supported by the Router? Frequently Asked QuestionsWhere is my SecureEasySetup button? Where is the Router installed on the network?Does the Router support ICQ send file? What is Network Address Translation and what is it used for?How can I block corrupted FTP downloads? Is the Router cross-platform compatible? What is DMZ Hosting?What are the advanced features of the Router? What is the Ieee 802.11g standard?What is ad-hoc mode? What is the Ieee 802.11b standard?What Ieee 802.11g features are supported? What Ieee 802.11b features are supported?What is Spread Spectrum? What is ISM band?What is DSSS? What is FHSS? And what are their differences? How do I resolve issues with signal loss? What is WEP?What is a MAC Address? How do I reset the Router?Security Precautions Appendix B Wireless SecuritySecurity Threats Facing Wireless Networks Appendix B Wireless Security Wireless-G Home Router Appendix C Upgrading Firmware Figure C-1 Upgrade FirmwareTCP/IP Appendix D Windows HelpWindows 2000 or XP Instructions Windows 98SE or Me InstructionsFigure E-4 MAC Address Filter List For the Router’s Web-based UtilityAppendix F Glossary Wireless-G Home Router Wireless-G Home Router Wireless-G Home Router Wireless-G Home Router WRH54G Appendix G SpecificationsFCC Limited Warranty Appendix H Warranty InformationAppendix I Regulatory Information Wireless-G Home Router Wireless-G Home Router Wireless-G Home Router Wireless-G Home Router Wireless-G Easy Router Appendix J Contact Information
Top Page Image Contents