ADSL Modem
Chapter 2: Getting to Know the ADSL Modem
The Back Panel
The Modem’s ports, where cables are connected, are located on the back panel. The Modem’s reset button is also located on the back panel.
| Figure |
DSL | The DSL port connects to the DSL line. |
Ethernet | The Ethernet port connects to your computer and other network devices. |
Reset Button | There are two ways to reset the Modem's factory default settings. Either press the Reset |
| Button, for approximately ten seconds, or restore the defaults on the Factory Defaults screen |
| of the Administration tab in the Modem’s |
Power | The Power port is where you connect the power adapter. |
With these, and many other, Linksys products, your networking options are limitless. Go to the Linksys international website at www.linksys.com/international for more information about products that work with the Modem.
Important: Resetting the Modem to factory defaults will erase all of your settings (WAN and LAN settings, etc.) and replace them with the factory defaults. Do not reset the Modem if you want to retain these settings.
Chapter 2: Getting to Know the ADSL Modem | 3 |
The Back Panel