Linksys AM200 manual Ethernet Connection

ADSL Modem

IMPORTANT: For countries that have phone jacks with RJ-11 connectors, make sure to only place the microfilters between the phone and the wall jack and not between the Modem and the wall jack or your DSL will not connect.

For countries that do not have phone jacks with RJ-11 connectors (e.g. France, Sweden, Switzerland, United Kingdom, etc.), except for ISDN users, the microfilter has to be used between the modem and the wall jack, because the microfilter will have the RJ-11 connector.

2.Connect one end of the provided Ethernet cable to your PC’s Ethernet port. Connect the other end of the cable to the Ethernet port on the back of your Modem.

3.Connect the power adapter to your Modem and to the electrical outlet.

NOTE: You should always plug the Modem’s power adapter into a power strip with surge protection.

4. Turn on your PC.

The connection of the Modem is complete.

Chapter 3: Setting Up and Connecting the ADSL Modem

Figure 3-3: Ethernet Connection

Figure 3-4: Power Connection

6

Connecting the Modem