ADSL Modem
Chapter 3: Setting Up and Connecting the ADSL Modem
Overview
In this chapter, you will connect the Modem to your DSL line and to a computer in your home or business. It is not necessary to mount your Modem, but may be useful to conserve space. There are 2 slots on the underside of the Modem that can be used for wall mounting.
Wall-Mount Option
You will need 2 suitable screws (4.4 mm screw diameter) to mount the Modem.
1.Determine where you want to mount the Modem. Ensure that the wall you use is smooth, flat, dry and sturdy and make sure the location is within reach of the power outlet.
2.Drill two holes into the wall. Make sure the holes are 101.6 mm (4 inches) apart.
3.Insert a screw into each hole, and leave 3 mm (0.12 inch) of its head exposed.
4.Maneuver the Modem so the
5.Place the
Congratulations! The
101.6 mm (4 inches) 
Figure 3-1: Wall-Mount Option
Connecting the Modem
1.Connect one end of the provided phone cable to the DSL
NOTE: A small device called a microfilter (not included) may be necessary between each phone and wall jack to prevent interference. Contact your ISP if you have any questions.
Figure 3-2: DSL Connection
Chapter 3: Setting Up and Connecting the ADSL Modem | 5 |
Overview