Improperly connecting a filter to your wireless modem router will block your ADSL connection.
3.Connect the Ethernet cable (D) from a wireless modem router LAN port to the Ethernet adapter in your computer.
4.Connect the power adapter to the router and plug it in to a power outlet.
D
Figure 10
5.Connect any additional wired PCs to your router by inserting an Ethernet cable from a PC into one of the three remaining LAN ports.
Verifying Your Connection
Verify that your router is connected correctly by checking the wireless modem router status lights.
•
The power light is lit after turning on the router.
•
The DSL Internet light is lit, indicating a DSL connection.
•
The wireless light is lit after turning on the router.
•
The Internet light is green, indicating you are connected to the ADSL network.
Now, turn on your computer. If software usually logs you in to your Internet connection, do not run that software. Cancel it if it starts automatically. Verify the following:
Installing Your Router Manually (Advanced, Mac, and Linux Users) | 15 |