NETGEAR DG834Gv5 manual Configuring Your Wireless Network

Page 28

To access the Internet from any computer connected to your wireless modem router, launch a browser such as Microsoft Internet Explorer or Netscape Navigator. You should see the wireless modem router’s Internet LED blink, indicating communication to the ISP.

If you are planning a mixed network of WPS capable devices and non-WPS capable devices, NETGEAR suggests that you set up your wireless network and security settings manually first, and use WPS only for adding additional WPS capable devices.

For more information on setting up your wireless network and configuring your wireless security settings, see the User Manual. A link to the on-line User Manual is on your Resource CD.

24

Configuring Your Wireless Network

Image 28
Contents Wireless ADSL2+ Modem Router Setup Manual NETGEAR, IncTrademarks Contents Technical Specifications and Default Configuration Getting to Know Your Wireless Router Unpacking Your New RouterFront Panel Hardware FeaturesActivity Description Back Panel DSLRouter Side Panel Positioning Your Wireless Router Router LabelInstalling Your Wireless Modem Router Getting to Know Your Wireless Router Getting to Know Your Wireless Router Installing Your Router Using Smart Wizard Using the Smart WizardInstalling Your Router Using the Smart Wizard Adsl Microfilters see Understanding Adsl Microfilters on Adsl Microfilter Understanding Adsl MicrofiltersAdsl Microfilter with Built-In Splitter Connecting Your Wireless Modem Router Two-line filter connection Verifying Your Connection Setting Up Your Router for Internet Access Page Read Troubleshooting on Configuring Your Wireless Network Specifying Wireless SettingsSetting Your Ssid and Wireless Security Manually Using Push N Connect WPS to Configure Your Wireless Network To set up basic wireless connectivity Configuring Your Wireless Network Configuring Your Wireless Network Troubleshooting Basic FunctioningPower LED is Red Power LED Not OnLAN or Internet Port LEDs Not On Troubleshooting the Web Configuration Interface Troubleshooting the ISP Connection Adsl linkObtaining an Internet IP Address Troubleshooting PPPoE or PPPoA Troubleshooting Internet BrowsingTroubleshooting a TCP/IP Network Using the Ping Utility Testing the LAN Path to Your RouterTesting the Path from Your Computer to a Remote Device Restoring the Default Configuration and PasswordResetting to Factory Default Settings General Specifications Default Configuration Feature Default Behavior Router LoginInternet Connection Local Network LANFeature Wireless Default Behavior NetgearTechnical Specifications and Default Configuration Related Documents Document LinkRelated Documents Registration and Certifications