NETGEAR DG834Gv5 manual General Specifications

Page 37

Technical Specifications and Default Configuration

This appendix provides technical specifications and factory default configuration settings for the wireless modem router.

General Specifications

The following table lists technical specification for the wireless modem router.

Network Protocol and

TCP/IP, DHCP, PPPoE or PPPoA, RFC 1483 Bridged or Routed

Standards

Ethernet, and RFC 1577 Classical IP over ATM

Compatibility

 

 

 

Power adapter

North America: 120V, 60 Hz, input

 

UK, Australia: 240V, 50 Hz, input

 

Europe: 230V, 50 Hz, input

 

Japan: 100V, 50/60 Hz, input

 

All regions (output): 12 V DC @ 1.0A output

 

 

Physical

Dimensions: 6.9 in. x 1.1 in. x 4.7 in.

 

(175.3 mm x 27.9 mm x 119.4 mm)

 

 

 

Weight: 0.7 lbs. ( 0.3 kg)

 

 

Environmental

Operating temperature: 0° to 40° C (32º to 104º F)

 

 

 

Operating humidity: 90% maximum relative humidity, noncondensing

 

 

Regulatory compliance

Meets requirements of: FCC Part 15 Class B; VCCI Class B; EN 55 022

 

(CISPR 22), Class B

Interface specifications

LAN: 10BASE-T or 100BASE-Tx, RJ-45

 

 

 

WAN: ADSL, Dual RJ-11, pins 2 and 3

 

T1.413, G.DMT

 

ITU Annex A or B (ITU Annex A and ITU Annex B are separate models.

 

The same unit cannot do both.)

33

Image 37
Contents NETGEAR, Inc Wireless ADSL2+ Modem Router Setup ManualTrademarks Contents Technical Specifications and Default Configuration Unpacking Your New Router Getting to Know Your Wireless RouterFront Panel Hardware FeaturesActivity Description DSL Back PanelRouter Side Panel Router Label Positioning Your Wireless RouterInstalling Your Wireless Modem Router Getting to Know Your Wireless Router Getting to Know Your Wireless Router Using the Smart Wizard Installing Your Router Using Smart WizardInstalling Your Router Using the Smart Wizard Adsl Microfilters see Understanding Adsl Microfilters on Adsl Microfilter Understanding Adsl MicrofiltersAdsl Microfilter with Built-In Splitter Connecting Your Wireless Modem Router Two-line filter connection Verifying Your Connection Setting Up Your Router for Internet Access Page Read Troubleshooting on Specifying Wireless Settings Configuring Your Wireless NetworkSetting Your Ssid and Wireless Security Manually Using Push N Connect WPS to Configure Your Wireless Network To set up basic wireless connectivity Configuring Your Wireless Network Configuring Your Wireless Network Basic Functioning TroubleshootingPower LED is Red Power LED Not OnLAN or Internet Port LEDs Not On Troubleshooting the Web Configuration Interface Adsl link Troubleshooting the ISP ConnectionObtaining an Internet IP Address Troubleshooting Internet Browsing Troubleshooting PPPoE or PPPoATesting the LAN Path to Your Router Troubleshooting a TCP/IP Network Using the Ping UtilityTesting the Path from Your Computer to a Remote Device Restoring the Default Configuration and PasswordResetting to Factory Default Settings General Specifications Feature Default Behavior Router Login Default ConfigurationInternet Connection Local Network LANNetgear Feature Wireless Default BehaviorTechnical Specifications and Default Configuration Document Link Related DocumentsRelated Documents Registration and Certifications