NETGEAR C6300 View a Network Map, Select Advanced Administration Logs,  To view the network map

Page 71

AC1750 WiFi Cable Modem Router

4.Select ADVANCED > Administration > Logs.

The log screen shows the following information:

•Description. The action that occurred.

•Count. The number of occurrences.

•Last Occurrence. The date and time the log entry was recorded.

•Target. The name or IP address of the website or news group visited or to which access was attempted.

•Source. The source IP address of the initiating device for this log entry.

5.To customize the log, clear or select the check boxes:

6.Click the Apply button. Your settings are saved.

7.To refresh the log screen, click the Refresh button.

8.To clear the log entries, click the Clear Log button.

To send the log immediately, click the Send Log button.

View a Network Map

The network map displays information about devices connected to your network.

To view the network map:

1.Launch a web browser from a computer or wireless device that is connected to the network.

2.Type http://routerlogin.net or http://192.168.0.1. A login screen displays.

Manage Your Network

71

Image 71

Contents AC1750 WiFi Cable Modem Router Trademarks SupportCompliance Contents Specify Network Settings Appendix a Supplemental Information Hardware Setup Front Panel Unpack Your Modem RouterLED Position Your Modem Router Rear Panel To retrieve the product label from the modem router Retrieve and Display the Product LabelCable the Modem Router in a Simple Network Cable Your Modem Router To cable your modem router to a gateway or router Cable Your Modem Router to a Router or Gateway To cable your modem router Select Advanced Administration Router Mode Connect to the Network Access the Modem Router  To find and select the WiFi network Wired ConnectionWiFi Connection  To use WPS to connect to the WiFi network To log in to the modem router Types of LoginsLog In to the Modem Router Specify Initial Settings Notify Your Internet Provider  To set up your Internet connectionSelect Cable Connection Specify the Cable Connection Starting Frequency To change the starting frequency  To view the status of the modem router initialization View Modem Router InitializationSelect Advanced Setup Internet Setup Specify the Internet Connection Settings To specify the Internet connection settings Specify Initial Settings Control Access to the Internet Select Parental Controls Set Up Parental Controls To set up Live Parental Controls Control Access to the Internet  To block Internet sites Use Keywords to Block Internet SitesClick the Take me to the status screen button  To delete keywords from the list Select Advanced Security Block SitesClick the Add Keyword button Select Advanced Security Block Services Block Services from the Internet To block services Schedule When to Block Internet Sites and Services  To specify a trusted computer Avoid Blocking on a Trusted Computer To schedule blocking Select Advanced Security Schedule To set up email notifications Set Up Security Event Email NotificationsControl Access to the Internet Modem Router  To connect a USB drive Access a USB Drive on the NetworkUSB Drive Requirements  To map the USB device to a Windows network drive Control Access to the USB Drive To specify the USB access settings Network Neighborhood/MacShare. Enabled by default Select Advanced USB Storage Advanced SettingsUse FTP Within the Network  To set up FTP access To view or change network folders View or Change Network Folders on a USB DriveClick the Create Network Folder button Add a Network Folder on a USB Drive To add a network folder Select Advanced ReadySHARE To approve USB devices Edit a Network Folder on a USB DriveApprove USB Devices  To edit a network folderSelect the Allow only approved devices check box Select Advanced Advanced Setup USB SettingsClick the Approved Devices button  To remove a USB disk drive safely Select USB Storage Basic SettingsSafely Remove a USB Drive Specify Network Settings Select Advanced Setup WAN Setup View or Change the WAN Settings To view or change the WAN settings  To change the MTU size Change the MTU SizeCommon MTU sizes  To set up a default DMZ server Set Up a Default DMZ Server To change the modem router’s device name Change the LAN TCP/IP SettingsSelect Advanced Setup LAN Setup Change the Modem Router’s Device Name To change the LAN TCP/IP settings Specify the IP Addresses That the Modem Router Assigns  To reserve an IP address Reserve LAN IP Addresses To delete a reserved address entry  To edit a reserved address entrySelect Advanced WPS Wizard Use the WPS Wizard for WiFi ConnectionsSpecify Basic WiFi Settings  To use the WPS Wizard To specify basic wireless settings  To change the WPA settings Change the WiFi Security Option To set up a guest network Set Up a WiFi Guest NetworkSelect Guest Network  To enable or disable the wireless radios Control the Wireless RadiosUse the WiFi On/Off Button Enable or Disable the Wireless Radios To specify WPS settings Specify WPS SettingsSelect Advanced Advanced Setup Wireless Settings  To set up wireless card access Set Up a Wireless Card Access ListClick the Set Up Access List button Dynamic DNS  To set up Dynamic DNSSelect Advanced Advanced Setup Dynamic DNS Select the Use a Dynamic DNS Service check boxImprove Network Connections with Universal Plug and Play  To enable Universal Plug and PlaySelect Advanced Advanced Setup UPnP  To refresh the information in the UPnP Portmap Table Manage Your Network  To view modem router cable information View Modem Router StatusView Cable Information  To view modem router status and usage information To view modem router Internet port information View Internet Port Information To reboot the modem router Reboot the Modem RouterWireless Settings  To view wireless settings To change the router mode Change the Router Mode To view and customize logs View Logs of Modem Router Activity To view the network map Select Advanced Administration LogsView a Network Map  To back up the modem router’s configuration settings Manage the Modem Router Configuration FileBack Up Settings Select Advanced Administration Network Map To restore configuration settings that you backed up Restore Configuration SettingsErase the Current Configuration Settings Select Advanced Administration Backup SettingsSelect Advanced Administration Set Password Change the admin Password To erase the configuration settings  To set the password for the user name admin To view the event logs Select Advanced Administration Event LogView Event Logs Run the Ping Utility To run a ping test  To run a traceroute test Select Advanced Administration DiagnosticsRun the Traceroute Utility Select Advanced Administration Wireless AP View Wireless Access Points in Your AreaView or Change the Modem Router Wireless Channel  To manage your wireless access point APRemote Management  To view or change your wireless channelSelect Advanced Administration Wireless Channel  To set up remote management  To use remote access Specify Internet Port Settings  To forward specific incoming protocols Set Up Port Forwarding to a Local ServerClick the Add Custom Service button Add a Custom Port Forwarding Service To add a custom service  To delete a port forwarding entry Edit a Port Forwarding ServiceDelete a Port Forwarding Entry  To edit a port forwarding entry To make a local web server public How the Modem Router Implements the Port Forwarding RuleApplication Example Make a Local Web Server Public  To add a port triggering service Set Up Port TriggeringAdd a Port Triggering Service Specify Internet Port Settings Click the Apply button Specify When to Use Port Triggering To specify when to use port triggering Application Example Port Triggering for Internet Relay Chat Troubleshooting Cannot Log In to the Modem Router Use LEDs to TroubleshootTroubleshoot the Cable Internet Connection Troubleshoot a TCP/IP Network Using a Ping UtilityPing Use Ping to Test the LAN Path to Your Modem RouterReply from IP address bytes=32 time=NN ms TTL=xxx Supplemental Information Factory default settings Factory Default SettingsAC1750 WiFi Cable Modem Router Factory default settings Technical Specifications