|
|
|
|
|
|
|
|
|
| MAC Address: Enter the AP MAC address in this column; the maximum |
| ||
|
|
| input is 12 digits. |
| ||
|
|
| Comment: Enter a comment or description for the AP MAC address. |
| ||
|
|
| Apply Changes: Click to add a new MAC address. |
| ||
|
|
| Reset: Click to clear previous settings. |
| ||
|
|
| Current WDS List: This table displays you the AP MAC information. |
| ||
|
|
| Delete Selected: To delete clients from access to this Access Point, you |
| ||
|
|
| may firstly check the Select checkbox next to the MAC address and |
| ||
|
|
| Comments, and press Delete Selected. |
| ||
|
|
| Delete All: To delete all the clients from access to this Access Point, just |
| ||
|
|
| press Delete All. |
| ||
|
|
| Reset: If you have made any selection, press Reset will clear all the select |
| ||
|
|
| mark. |
| ||
|
|
|
|
|
|
|
| Apply Changes |
|
| Click to save the current settings. |
| |
|
|
|
|
|
|
|
| Reset |
|
|
| Click to reset this page. |
|
|
|
|
|
|
|
|
GW Mode
Gateway Mode Settings
Alias Name
Band
SSID
Display the name of this device.
You can choose one mode of the following you need.
~2.4GHz (B): 802.11b supported rate only.
~2.4GHz (G): 802.11g supported rate only.
~2.4GHz (B+G): 802.11b supported rate and 802.11g supported rate. The default is 2.4GHz (B+G) mode.
The SSID differentiates one WLAN from another; therefore, all access points and all devices attempting to connect to a specific WLAN must use the same SSID. It is
12