Abocom WAP2102 manual Using Dhcp, Using a fixed IP Address Use the following IP Address

Page 33

Using DHCP

To use DHCP, select the radio button Obtain an IP Address automatically. This is the default Windows setting. Using this is recommended. By default, the Wireless Router will act as a DHCP Server.

Restart your PC to ensure it obtains an IP Address from the Wireless Router.

Using a fixed IP Address ("Use the following IP Address")

If your PC is already configured, check with your network administrator before making the following changes.

Enter the Wireless Router's IP address in the Default gateway field and click OK. (Your LAN administrator can advise you of the IP Address they assigned to the Wireless Router.)

If the DNS Server fields are empty, select Use the following DNS server addresses, and enters the DNS address or addresses provided by your ISP, then click OK.

Checking TCP/IP Settings - Windows XP

1.Select Control Panel - Network Connection.

2.Right click the Local Area Connection and choose Properties. You should see a screen like the following:

3.Select the TCP/IP protocol for your network card.

30

Image 33
Contents Wireless 802.11b/g Portable Router FCC RF Radiation Exposure Statement FCC CertificationsCE Mark Warning CE Statement:PC Configuration ConfigurationAppendix a Troubleshooting Appendix B about Wireless Lans BSSFeatures IntroductionHardware Connection Front Panel LED Indicators LED IndicatorsAP Mode GW ModeAbout the Operation Modes Client Mode Infrastructure Login ConfigurationCable Modems Other Modems e.g. Broadband WirelessDSL Modems Common Connection TypesOperation Mode Configuration via WebOperation Mode Access Point GatewayAP Mode Settings AP ModeChannel Number Mode Alias Name BandPSK Security Advanced SettingsBroadcast Ssid Access Control WDS Setting Reset GW ModeGateway Mode Settings Press Delete AllClick Setup button to enter the Wireless Advanced Settings Channel Number Security Advanced SettingsClick Setup to enter the Wireless Access Control screen Access ControlWAN Port Click Setup to enter the WAN Port Configuration screenDMZ Virtual ServerRemote Management URL Filter MAC Filter IP Filter Ddns Apply Changes ResetClient Mode Client Mode SettingsAlias Name Page Site Survey Apply Changes Reset System Address Wlan Configuration MAC AddressStatus System DataLAN Interface Setup IP Address Active ClientsSubnet Mask DNS Server Apply Changes Reset Upgrade FirmwareDhcp Dhcp Client Range Show ClientPassword RebootUpgrade Firmware Browse Upload Reset Factory DefaultNetwork Diagnostics DNS Lookup DiagnosticsLog System LogTCP/IP Settings Overview PC ConfigurationOverview Windows ClientsChecking TCP/IP Settings Windows Using Dhcp Using a fixed IP Address Use the following IP AddressChecking TCP/IP Settings Windows XP Using Dhcp Internet Access Accessing AOLFor Windows For Windows XPLinux Clients Macintosh ClientsOther Unix Systems Fixed IP AddressSsid Essid Wireless Station ConfigurationTroubleshooting General ProblemsInternet Access Wireless Access Wireless LAN Configuration About Wireless LANsWEP Authentication ChannelsRegulatory Approvals CE StandardsCE Marking Warning