Wireless Station Configuration
•This section applies to all Wireless stations wishing to use the Wireless Router's Access Point, regardless of the operating system that is used on the client.
•To use the Wireless Portable Router in the Wireless Router, each Wireless Station must have compatible settings, as follows:
Mode | The mode must be set to Infrastructure. |
SSID (ESSID) | This must match the value used on the Wireless Router. The default |
| value is Untitled |
| Note! The SSID is case sensitive. |
WEP | By default, WEP on the Wireless Router is disabled. |
| • If WEP remains disabled on the Wireless Router, all stations must |
| have WEP disabled. |
| • If WEP is enabled on the Wireless Router, each station must use the |
| same settings as the Wireless Router. |
|
|
Note:
By default, the Wireless Router will allow both 802.11b and 802.11g connections.
34