Abocom WAP2102 manual Introduction, Features, Hardware Connection

Page 4

Chapter 1: Introduction

This is an IEEE802.11b/g compliant 11 Mbps & 54 Mbps Ethernet Wireless Portable Router. The Wireless Portable Router is equipped with two 10/100 M Auto-sensing Ethernet ports for connecting to LAN and also for cascading to next Wireless Portable Router.

This Portable Router provides 64/128bit WEP encryption, WPA and IEEE802.1x that ensures a high level of security to protects users’ data and privacy. The MAC Address filter prevents the unauthorized MAC Addresses from accessing your Wireless LAN. Your network security is therefore double assured.

Features

1.One port for both wireless LAN and WAN.

2.Support WPA/WAP2/WPA-PSK/WPA2-PSK/WAP-RADIUS/WPA2-RADIUS.

3.Support AP and Gateway modes.

4.Automatic channel selection.

5.Client access control.

6.Support 802.1x/ Radius client with EAP-TLS, TKIP, AES encryption.

7.Adjustable Tx power, Tx rate, and SSID broadcast.

8.Allow WEP 64/128 bit.

9.MAC filtering.

Hardware Connection

1.Connect one end of the Ethernet cable to the Wireless 802.11b/g Portable Router, another end to your PC or notebook.

2.Connect the Wireless 802.11b/g Portable Router with a power to an outlet.

Image 4

Contents Wireless 802.11b/g Portable Router FCC Certifications FCC RF Radiation Exposure StatementCE Mark Warning CE Statement：Configuration PC ConfigurationAppendix a Troubleshooting Appendix B about Wireless Lans BSSIntroduction FeaturesHardware Connection LED Indicators Front Panel LED IndicatorsGW Mode AP ModeAbout the Operation Modes Client Mode Infrastructure Configuration LoginOther Modems e.g. Broadband Wireless Cable ModemsDSL Modems Common Connection TypesConfiguration via Web Operation ModeOperation Mode Access Point GatewayAP Mode AP Mode SettingsChannel Number Mode Alias Name BandSecurity Advanced Settings PSKBroadcast Ssid Access Control WDS Setting GW Mode ResetGateway Mode Settings Press Delete AllChannel Number Security Advanced Settings Click Setup button to enter the Wireless Advanced SettingsAccess Control Click Setup to enter the Wireless Access Control screenClick Setup to enter the WAN Port Configuration screen WAN PortVirtual Server DMZRemote Management URL Filter MAC Filter IP Filter Apply Changes Reset DdnsClient Mode Settings Client ModeAlias Name Page Site Survey Apply Changes Reset Address Wlan Configuration MAC Address SystemStatus System DataActive Clients LAN Interface Setup IP AddressSubnet Mask Upgrade Firmware DNS Server Apply Changes ResetDhcp Dhcp Client Range Show ClientReboot PasswordUpgrade Firmware Browse Upload Reset Factory DefaultDiagnostics Network Diagnostics DNS LookupLog System LogPC Configuration TCP/IP Settings OverviewOverview Windows ClientsChecking TCP/IP Settings Windows Using a fixed IP Address Use the following IP Address Using DhcpChecking TCP/IP Settings Windows XP Using Dhcp Accessing AOL Internet AccessFor Windows For Windows XPMacintosh Clients Linux ClientsOther Unix Systems Fixed IP AddressWireless Station Configuration Ssid EssidGeneral Problems TroubleshootingInternet Access Wireless Access About Wireless LANs Wireless LAN ConfigurationWEP Authentication ChannelsCE Standards Regulatory ApprovalsCE Marking Warning