WAN Port
information.
Delete Selected: To delete clients from access to this Router, you may firstly check the Select checkbox next to the MAC address and Comments, and press Delete Selected.
Delete All: To delete all the clients from access to this Router, just press Delete All without selecting the checkbox.
Reset: If you have made any selection, press Reset will clear all the select mark.
Click Setup to enter the WAN Port Configuration screen.
WAN Access Type: Select the WAN access type (Static IP, DHCP, PPPoE and PPTP) from the
Attain DNS Automatically: Select to attain DNS automatically.
Set DNS Manually: Select to set DNS manually.
DNS1~3: Enter the DNS server IP address (es) provided by your ISP, or you can specify your own preferred DNS server IP address(es).
DNS 1 and DNS 2 servers are optional. You can enter another DNS server’s IP address as a backup. DNS 1 and DNS 2 servers will be used when the DNS 1 server fails.
Clone MAC Address: Enter the MAC address that you wish to clone.
Respond to WAN Ping: Click to allow pinging from WAN side.
Save: Click to save and apply the current settings.
Reset: Click to clear and reset the current settings.
Close: click to exit the current settings.
15