Multiquip STX55Y6 operation manual Machine Safety Decals, STX-SERIES Decals

Page 19

STX-SERIES — OPERATION AND SAFETY DECALS

Machine Safety Decals

The STX-SERIES Ride-On Power Trowel is equipped with a number of operation and safety decals.These decals are provided for operator safety and maintenance information. Should any of these decals become unreadable, replacements can be obtained from your dealer.

WARNING

To avoid injury,

you MUST read

and understand

operator’s manual

before using this

machine.

This machine to

be operated by

qualified

personnel only.

Ask for training

as needed.

P/N 35137

P/N 35137

P/N 21589 BLACK 4.76 X 21.87

 

WARNING

CLOCKWISE

P/N 21579

BELT DRIVE

in severe injury or death.

 

 

Inhaling exhaust fumes can result

 

 

Only operate machine in well-

 

 

ventilated areas.

 

 

DO NOT inhale exhaust fumes.

 

DANGEROUS

Only qualified personnel should

 

FUMES

install, use, or service this equipment.

 

 

P/N 36090

 

GEAR DRIVE GEAR DRIVE

P/N 30690

P/N: 13118

P/N: 21455

 

LEFT

TWIN

 

PITCH MORE PITCH PITCH

 

ONLY

LESS PITCH

P/N 21590

 

 

 

P/N: 21169

 

WARNING

P/N 2814 (WHITE)

 

 

MODEL

 

 

SERIAL NO.

 

 

 

ROTATING BLADE

CONTACT

 

HAZARD

Keep hands

SERVICE

and feet clear

DEPARTMENT

of guard rings.

Stop engine

 

before servicing.

 

 

P/N 35168

 

P/N 35168

WARNING

HOT COOLANT can cause severe burns.

DO NOT remove cap if radiator is hot.

P/N 36091

P/N 30691

WARNING

DIESEL FUEL can cause

fire or explosion.

Stop engine before fueling

Keep cigarettes, sparks

and flame away.

P/N 36092

P/N 30692

P/N 36099 (ISO Blue)

CHECK CHECK

COUNTER

HOT CLOCKWISE

LIFTING POINT LIFTING POINT

LUBRICATION LUBRICATION

LUBRICATION LUBRICATION

P/N: 11246

P/N: 20486

P/N 20936

Engine exhaust and some of its constituents, and some dust created by power sanding, sawing, grinding, drillingandotherconstructionactivities contains chemicals known to the State of California to cause cancer, birth defects and other reproductive harm. Some examples of these chemicals are:

Leadfromlead-basedpaints.

Crystallinesilicafrombricks.

Cementandothermasonryproducts.

Arsenicandchromiumfromchemically

treatedlumber.

Your risk from these exposures varies, dependingonhowoftenyoudothistype of work. To reduce your exposure to these chemicals: ALWAYS work in a well ventilated area, and work with approved safety equipment, such as dust masks that are specially designed to filter out microscopic particles.

 

 

 

 

P/N 20953

 

 

 

 

DECAL ENGINE

HIGH E

 

 

 

SPEED PLATE

N

G

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

I

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

N

E

 

 

 

 

 

 

 

 

S

P

 

 

 

 

 

 

 

 

E

 

 

 

 

 

 

 

 

E

D

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

LOW

WARNING

Avoid injury.

Do NOT operate with

guards removed.

Replace guard before

operating machine.P/N 21665

P/N: 21665

DIESEL FUEL

P/N 20872

P/N 20525

P/N 11712

P/N: 11811

Figure 1. STX-SERIES Decals

STX-SERIES • RIDE-ON POWER TROWEL — OPERATION MANUAL — REV. #0 (03/15/06) — PAGE 19

Page 18 Page 20
Image 19
Page 18 Page 20
Contents STX RIDE-ON Power Trowel STX55Y6 Page Page Page Heres HOW to GET Help STX-SERIES Table of Contents Order via Fax Dealers Only Best Deal! Order via Internet Dealers OnlySee Notes Next STX-SERIES DimensionsThis value includes the seat height Lube Oil CapacityTraining Checklist STX-SERIES Training ChecklistDaily PRE-OPERATION Checklist STX-SERIES Daily PRE-OPERATION ChecklistYou can be Injured if you do not follow these directions STX-SERIES Safety Message Alert SymbolsAlways wear approved eye and hearing protection Always wear approved respiratory protectionDo not operate or service this SafetyFatigue, illness or taking medicine Order Form PT-160 Additional Safety InformationSTX-SERIES Rules for Safe Operation Always keep the work area well organizedAlways keep the battery charged. If Towing Safety PrecautionsSecure portable power cables in cable tray with tie wraps BatteryEmergencies Maintenance SafetyAlways know the location of the nearest first aid kit Hydraulic Steering Intended UseEngine Blades Hydraulic MotorSTX-SERIES Decals Machine Safety DecalsToolbox Compartment Storage for tools STX-SERIES Controls and IndicatorsSTX-SERIES Controls and Indicators Fuel Return Hose Provides fuel to the fuel injection pump STX-SERIES Basic Engine InformationAccelerator system Oil in crankcaseBattery Setup STX-SERIES Trowel SetupTrowel Setup Seat AssemblyHydraulic Oil STX-SERIES PRE-INSPECTIONPRE-INSPECTION Engine OilStarting the Engine STX-SERIES Initial START-UPFuel Initial START-UPEngine Throttle Control Lever Low STX-SERIES Initial START-UPPalm Handle Forward Reverse STX-SERIES OperationOperation SteeringTrowel Speed Limiter Control STX-SERIES OperationSpeed limiter control located on the control panel Figure Left Pitch all the way Down Blade Pitch ControlEngine Shut-Down Failure to allow the engine to idleMaintenance STX-SERIES MaintenanceClean the inside of the dust pan Precleaner ServiceAir Cleaner Daily Remove the air cleaner elementFuel Filter 200 Hours Make sure the correct depth airChanging Engine Oil And Filter Oil Filter 100 HoursLong Term Storage STX-SERIES MaintenanceBattery/Charging System Radiator/Cooling SystemPump Actuation Levers Connecting Rod Maintenance ProceduresChecking/Adjusting Trowel Speed Left Side Trowel Speed AdjustmentMatching Blade Pitch for Both Sets of Blades STX-SERIES MaintenanceTrowel Blade Removal Stabilizer Ring RemovalHex Cap Screw Lock Washer Rod End Hex Nut Stabilizer Ring Changing a BladeBronze Bushings Checking Trowel Arm StraightnessSideview Trowel Arm AdjustmentLocate the trowel arm adjustment tool P/N Adjustment Bolt Distance Locking Nut Fixture ArmRe-Assembly Pressure Gauge Hydraulic Pump Checking Hydraulic PressureChecking Steering Pressure Steering Pressure AdjustmentPitch Pressure Check Pitch Pressure Out of SpecificationDecommissioning Trowel/Components Installing Pans Onto Finisher BladesTroubleshooting STX-SERIES TroubleshootingLights optional not working Lights? STX-SERIES TroubleshootingPage Payment Terms Multiquip INC Your Local Dealer is
Related manuals
Manual 64 pages 22.72 Kb

STX55Y6 specifications

The Multiquip STX55Y6 is a state-of-the-art, high-performance compact excavator designed to tackle a variety of jobs in landscaping, construction, and industrial applications. Built with the operator in mind, this machine combines powerful performance, advanced technology, and exceptional maneuverability in tight spaces.

One of the defining features of the STX55Y6 is its robust engine, which delivers powerful performance while ensuring efficiency and reliability. The excavator is equipped with a 55 horsepower, tier 4-compliant diesel engine that meets stringent emissions standards. This not only contributes to environmental sustainability but also provides ample power for demanding tasks.

The STX55Y6 boasts a compact design with a width of just 39 inches, allowing it to easily navigate through narrow passages and tight job sites. Despite its small footprint, it does not compromise on performance, offering a digging depth of up to 10 feet and a maximum reach of 16.2 feet. This makes it an ideal choice for digging trenches, grading, and other excavation tasks.

Another highlight of the STX55Y6 is its advanced hydraulic system, which provides excellent control and precision during operation. The machine features a powerful hydraulic pump that delivers superior lifting and digging capabilities. Furthermore, the auxiliary hydraulic system allows for the attachment of various implements, such as buckets, breakers, and augers, enhancing the versatility of the machine.

Operator comfort is enhanced through a spacious cab that features adjustable seating, advanced visibility, and intuitive controls. The large, multifunction display provides crucial information at a glance, allowing operators to monitor performance and quickly adapt to changing job site conditions.

Durability is a hallmark of the STX55Y6, with a robust frame and reinforced undercarriage designed to withstand the rigors of daily use. This ensures longevity and reduces maintenance costs, making it a wise investment for any construction or landscaping operation.

In conclusion, the Multiquip STX55Y6 offers an impressive blend of power, versatility, and operator comfort. Its reliable engine, advanced hydraulic system, and compact design make it an essential tool for tackling a variety of excavation tasks efficiently and effectively. With its focus on performance and user experience, this excavator is perfectly suited for today's demanding job sites.
Top Page Image Contents