Multiquip STX55Y6 operation manual Stx-Series Pre-Inspection, Engine Oil, Hydraulic Oil

Page 24

STX-SERIES — PRE-INSPECTION

PRE-INSPECTION

1. When checking or adding oil, place the machine so the

engine is level.

NOTE

The following sections are intended to assist the operator with pre-inspection and the initial start- up of the STX-SERIES Ride-On Power Trowel. It is extremely important that these sections are read carefully before attempting to

2.

Pull the engine oil dipstick from its holder (item 1 Fig 6).

3.

Determine if engine oil is low (item 4). Oil should be

 

between the upper limit and lower limit (add oil) lines.

4.

If oil is below the "Add Engine Oil" line add oil up to upper

 

limit on the dipstick. Allow enough time for any added oil to

 

make its way to the oil pan before rechecking.

use the trowel in the field. DO NOT use your Ride-On Power Trowel until these sections are thoroughly understood.

WARNING

Failure to understand the operation of the STX-SERIES Ride- On Power Trowel could result in severe damage to the trowel or personal injury.

See Figures 2 and 3 (Pages 20 and 21) for the location of controls and indicators referenced in this manual.

Engine Oil

1

3

F

 

 

 

5

 

 

 

2

 

 

 

4

L

 

 

 

 

 

 

1.

 

Engine Oil Dipstick

 

2.

 

Engine Oil Filler Cap

3.Dipstick Oil Level Indicator

4. "Add Oil" Line

5. Upper Oil Level Line

CAUTION

DO NOT overfill the oil pan with engine oil. Always keep the engine oil level between the upper and lower limit lines on the dipstick.

Hydraulic Oil

Determine if the hydraulic oil is low by observing the level of oil in the hydraulic Oil Sight Glass (Figure 7). The hydraulic tank has an elevated overflow bottle. DO NOT remove the fill cap when the oil is hot or spillage will occur.

1

2

3

1. Hydraulic Oil Level Sight Glass

2. Normal Level

3.Low Level

Figure 7. Hydraulic Oil Sight Glass

Figure 3. Check and Fill Engine Oil

PAGE 24 — STX-SERIES • RIDE-ON POWER TROWEL — OPERATION MANUAL — REV. #0 (03/15/06)

Page 23 Page 25
Image 24
Page 23 Page 25
Contents STX RIDE-ON Power Trowel STX55Y6 Page Page Page Heres HOW to GET Help STX-SERIES Table of Contents Best Deal! Order via Internet Dealers Only Order via Fax Dealers OnlySTX-SERIES Dimensions See Notes NextLube Oil Capacity This value includes the seat heightSTX-SERIES Training Checklist Training ChecklistSTX-SERIES Daily PRE-OPERATION Checklist Daily PRE-OPERATION ChecklistSTX-SERIES Safety Message Alert Symbols You can be Injured if you do not follow these directionsAlways wear approved respiratory protection Always wear approved eye and hearing protectionSafety Do not operate or service thisFatigue, illness or taking medicine Additional Safety Information STX-SERIES Rules for Safe OperationAlways keep the work area well organized Order Form PT-160Towing Safety Precautions Secure portable power cables in cable tray with tie wrapsBattery Always keep the battery charged. IfMaintenance Safety EmergenciesAlways know the location of the nearest first aid kit Intended Use Engine BladesHydraulic Motor Hydraulic SteeringMachine Safety Decals STX-SERIES DecalsSTX-SERIES Controls and Indicators Toolbox Compartment Storage for toolsSTX-SERIES Controls and Indicators STX-SERIES Basic Engine Information Accelerator systemOil in crankcase Fuel Return Hose Provides fuel to the fuel injection pumpSTX-SERIES Trowel Setup Trowel SetupSeat Assembly Battery SetupSTX-SERIES PRE-INSPECTION PRE-INSPECTIONEngine Oil Hydraulic OilSTX-SERIES Initial START-UP FuelInitial START-UP Starting the EngineSTX-SERIES Initial START-UP Engine Throttle Control Lever LowSTX-SERIES Operation OperationSteering Palm Handle Forward ReverseSTX-SERIES Operation Trowel Speed Limiter ControlSpeed limiter control located on the control panel Figure Blade Pitch Control Engine Shut-DownFailure to allow the engine to idle Left Pitch all the way DownSTX-SERIES Maintenance MaintenancePrecleaner Service Air Cleaner DailyRemove the air cleaner element Clean the inside of the dust panMake sure the correct depth air Changing Engine Oil And FilterOil Filter 100 Hours Fuel Filter 200 HoursSTX-SERIES Maintenance Battery/Charging SystemRadiator/Cooling System Long Term StorageMaintenance Procedures Checking/Adjusting Trowel SpeedLeft Side Trowel Speed Adjustment Pump Actuation Levers Connecting RodSTX-SERIES Maintenance Matching Blade Pitch for Both Sets of BladesStabilizer Ring Removal Hex Cap Screw Lock Washer Rod End Hex Nut Stabilizer RingChanging a Blade Trowel Blade RemovalChecking Trowel Arm Straightness Bronze BushingsTrowel Arm Adjustment Locate the trowel arm adjustment tool P/NAdjustment Bolt Distance Locking Nut Fixture Arm SideviewRe-Assembly Checking Hydraulic Pressure Pressure Gauge Hydraulic PumpSteering Pressure Adjustment Checking Steering PressurePitch Pressure Out of Specification Pitch Pressure CheckInstalling Pans Onto Finisher Blades Decommissioning Trowel/ComponentsSTX-SERIES Troubleshooting TroubleshootingSTX-SERIES Troubleshooting Lights optional not working Lights?Page Payment Terms Your Local Dealer is Multiquip INC
Related manuals
Manual 64 pages 22.72 Kb

STX55Y6 specifications

The Multiquip STX55Y6 is a state-of-the-art, high-performance compact excavator designed to tackle a variety of jobs in landscaping, construction, and industrial applications. Built with the operator in mind, this machine combines powerful performance, advanced technology, and exceptional maneuverability in tight spaces.

One of the defining features of the STX55Y6 is its robust engine, which delivers powerful performance while ensuring efficiency and reliability. The excavator is equipped with a 55 horsepower, tier 4-compliant diesel engine that meets stringent emissions standards. This not only contributes to environmental sustainability but also provides ample power for demanding tasks.

The STX55Y6 boasts a compact design with a width of just 39 inches, allowing it to easily navigate through narrow passages and tight job sites. Despite its small footprint, it does not compromise on performance, offering a digging depth of up to 10 feet and a maximum reach of 16.2 feet. This makes it an ideal choice for digging trenches, grading, and other excavation tasks.

Another highlight of the STX55Y6 is its advanced hydraulic system, which provides excellent control and precision during operation. The machine features a powerful hydraulic pump that delivers superior lifting and digging capabilities. Furthermore, the auxiliary hydraulic system allows for the attachment of various implements, such as buckets, breakers, and augers, enhancing the versatility of the machine.

Operator comfort is enhanced through a spacious cab that features adjustable seating, advanced visibility, and intuitive controls. The large, multifunction display provides crucial information at a glance, allowing operators to monitor performance and quickly adapt to changing job site conditions.

Durability is a hallmark of the STX55Y6, with a robust frame and reinforced undercarriage designed to withstand the rigors of daily use. This ensures longevity and reduces maintenance costs, making it a wise investment for any construction or landscaping operation.

In conclusion, the Multiquip STX55Y6 offers an impressive blend of power, versatility, and operator comfort. Its reliable engine, advanced hydraulic system, and compact design make it an essential tool for tackling a variety of excavation tasks efficiently and effectively. With its focus on performance and user experience, this excavator is perfectly suited for today's demanding job sites.
Top Page Image Contents