Multiquip STX55Y6 operation manual STX-SERIES Operation, Trowel Speed Limiter Control

Page 28

1.The foot pedal (Figure 15) solely controls blade speed. The position of the foot pedal determines the blade speed. Slow blade speed is obtained by slightly depressing the pedal. Maximum blade speed is obtained by fully depressing the pedal.

Figure 15. Blade Speed Control Foot Pedal

2.Push both the left and right joysticks forward (Figure 16).

3

1

3

2

STX-SERIES — OPERATION

5.Practice maneuvering the Ride-on Power Trowel using the information listed in Table 3. Try to practice controlled motions as if you were finishing a slab of concrete. Practice edging and covering a large area

6.Try adjusting the pitch of the blades.This can be done with the ride-on trowel stopped or while the trowel is moving, whatever feels comfortable.Test the operation of optional equipment like retardant spray and lights if equipped.

7.Pull both the left and right joysticks backward (Figure 17) and repeat steps 3 through 6 while substituting the word reverse for forward.

1

2

3

3

1. Left Joystick Control

2. Right Joystick Control

3.Pull Back Reverse

Figure 17. Joystick Control Reverse Direction

1. Left Joystick Control

2. Right Joystick Control

3.Pull Back Forward

Figure 16. Joystick Control Forward Direction

3.With your right foot, slowly depress the right foot pedal halfway.Notice that the ride-on power trowel begins to move in a forward direction. Release both joystick controls to stop forward movement then remove your right foot from the foot pedal.

4.Practice holding the machine in one place as you increase blade speed. When about 75% of maximum blade speed has been reached, the blade will be moving at proper finishing speed. The machine may be difficult to keep in one place.Trying to keep the ride-on trowel stationary is a good practice for operation.

Trowel Speed Limiter Control

The speed limiter control located on the control panel (Figure

18)can be used to adjust the maximum trowel speed that can be obtained when the foot pedal is fully depressed. Pull up to reduce the maximum speed and push down to return to full speed. For fine adjustments, rotate the knob clockwise or counter-clockwise.

E

 

 

A

 

LD

S

E

 

HO

HOLD

LOW

Figure 18. Trowel Speed Limiter Control

PAGE 28 — STX-SERIES • RIDE-ON POWER TROWEL — OPERATION MANUAL — REV. #0 (03/15/06)

Page 27 Page 29
Image 28
Page 27 Page 29
Contents STX RIDE-ON Power Trowel STX55Y6 Page Page Page Heres HOW to GET Help STX-SERIES Table of Contents Best Deal! Order via Internet Dealers Only Order via Fax Dealers OnlySTX-SERIES Dimensions See Notes NextLube Oil Capacity This value includes the seat heightSTX-SERIES Training Checklist Training ChecklistSTX-SERIES Daily PRE-OPERATION Checklist Daily PRE-OPERATION ChecklistSTX-SERIES Safety Message Alert Symbols You can be Injured if you do not follow these directionsAlways wear approved respiratory protection Always wear approved eye and hearing protectionDo not operate or service this SafetyFatigue, illness or taking medicine Additional Safety Information STX-SERIES Rules for Safe OperationAlways keep the work area well organized Order Form PT-160Towing Safety Precautions Secure portable power cables in cable tray with tie wrapsBattery Always keep the battery charged. IfEmergencies Maintenance SafetyAlways know the location of the nearest first aid kit Intended Use Engine BladesHydraulic Motor Hydraulic SteeringMachine Safety Decals STX-SERIES DecalsSTX-SERIES Controls and Indicators Toolbox Compartment Storage for toolsSTX-SERIES Controls and Indicators STX-SERIES Basic Engine Information Accelerator systemOil in crankcase Fuel Return Hose Provides fuel to the fuel injection pumpSTX-SERIES Trowel Setup Trowel SetupSeat Assembly Battery SetupSTX-SERIES PRE-INSPECTION PRE-INSPECTIONEngine Oil Hydraulic OilSTX-SERIES Initial START-UP FuelInitial START-UP Starting the EngineSTX-SERIES Initial START-UP Engine Throttle Control Lever LowSTX-SERIES Operation OperationSteering Palm Handle Forward ReverseTrowel Speed Limiter Control STX-SERIES OperationSpeed limiter control located on the control panel Figure Blade Pitch Control Engine Shut-DownFailure to allow the engine to idle Left Pitch all the way DownSTX-SERIES Maintenance MaintenancePrecleaner Service Air Cleaner DailyRemove the air cleaner element Clean the inside of the dust panMake sure the correct depth air Changing Engine Oil And FilterOil Filter 100 Hours Fuel Filter 200 HoursSTX-SERIES Maintenance Battery/Charging SystemRadiator/Cooling System Long Term StorageMaintenance Procedures Checking/Adjusting Trowel SpeedLeft Side Trowel Speed Adjustment Pump Actuation Levers Connecting RodSTX-SERIES Maintenance Matching Blade Pitch for Both Sets of BladesStabilizer Ring Removal Hex Cap Screw Lock Washer Rod End Hex Nut Stabilizer RingChanging a Blade Trowel Blade RemovalChecking Trowel Arm Straightness Bronze BushingsTrowel Arm Adjustment Locate the trowel arm adjustment tool P/NAdjustment Bolt Distance Locking Nut Fixture Arm SideviewRe-Assembly Checking Hydraulic Pressure Pressure Gauge Hydraulic PumpSteering Pressure Adjustment Checking Steering PressurePitch Pressure Out of Specification Pitch Pressure CheckInstalling Pans Onto Finisher Blades Decommissioning Trowel/ComponentsSTX-SERIES Troubleshooting TroubleshootingSTX-SERIES Troubleshooting Lights optional not working Lights?Page Payment Terms Your Local Dealer is Multiquip INC
Related manuals
Manual 64 pages 22.72 Kb

STX55Y6 specifications

The Multiquip STX55Y6 is a state-of-the-art, high-performance compact excavator designed to tackle a variety of jobs in landscaping, construction, and industrial applications. Built with the operator in mind, this machine combines powerful performance, advanced technology, and exceptional maneuverability in tight spaces.

One of the defining features of the STX55Y6 is its robust engine, which delivers powerful performance while ensuring efficiency and reliability. The excavator is equipped with a 55 horsepower, tier 4-compliant diesel engine that meets stringent emissions standards. This not only contributes to environmental sustainability but also provides ample power for demanding tasks.

The STX55Y6 boasts a compact design with a width of just 39 inches, allowing it to easily navigate through narrow passages and tight job sites. Despite its small footprint, it does not compromise on performance, offering a digging depth of up to 10 feet and a maximum reach of 16.2 feet. This makes it an ideal choice for digging trenches, grading, and other excavation tasks.

Another highlight of the STX55Y6 is its advanced hydraulic system, which provides excellent control and precision during operation. The machine features a powerful hydraulic pump that delivers superior lifting and digging capabilities. Furthermore, the auxiliary hydraulic system allows for the attachment of various implements, such as buckets, breakers, and augers, enhancing the versatility of the machine.

Operator comfort is enhanced through a spacious cab that features adjustable seating, advanced visibility, and intuitive controls. The large, multifunction display provides crucial information at a glance, allowing operators to monitor performance and quickly adapt to changing job site conditions.

Durability is a hallmark of the STX55Y6, with a robust frame and reinforced undercarriage designed to withstand the rigors of daily use. This ensures longevity and reduces maintenance costs, making it a wise investment for any construction or landscaping operation.

In conclusion, the Multiquip STX55Y6 offers an impressive blend of power, versatility, and operator comfort. Its reliable engine, advanced hydraulic system, and compact design make it an essential tool for tackling a variety of excavation tasks efficiently and effectively. With its focus on performance and user experience, this excavator is perfectly suited for today's demanding job sites.
Top Page Image Contents