Multiquip STX55Y6 operation manual Re-Assembly

Page 39

STX-SERIES — MAINTENANCE

4.Use an allen wrench to tighten the locking bolts securing the trowel arm in place.

5.Adjust the bolt "distance" shown in Figure 37 to match one of the arms. The other arms will be adjusted to match this distance.

6.Loosen the locking nut on the trowel arm lever, then turn the trowel arm adjusting bolt until it barely touches (.010") the fixture adjusting bolt.

7.Once the correct adjustment is made, tighten the lock nut on the trowel arm to lock in place.

8.Loosen locking nuts on the adjustment fixture, and remove trowel arm.

9.Repeat steps for the remaining trowel arms.

Re-Assembly

1.Clean and examine the upper/lower wear plates and thrust collar.Examine the entire spider assembly.Wire brush any concreteorrustbuild-up.Ifanyofthespider componentsare found to be damaged or out of round, replace them.

2.Makesurethatthebronzetrowelarmbushingisnotdamage or out of round.Clean the bushing if necessary.If the bronze bushing is damaged or worn, replace it.

3.Reinstall bronze bushing onto trowel arm.

4.Repeat steps 2 -3 for each trowel arm.

5.Make sure that the spring tensioner is in the correct position to exert tension on the trowel arm.

6.Insertalltrowelarmswithleversintospiderplate(withbronze bushing already installed) using care to align grease hole on bronze bushing with grease hole fitting on spider plate.

7.Locktrowelarmsinplacebytighteningthehexheadboltwith zerk grease fitting and jam nut.

8.Re-install the blades onto the trowel arms.

9.Install stabilizer ring onto spider assembly.

10.Lubricate all grease points (zerk fittings) with premium "Lithum 12" based grease, conforming to NLG1 Grade #2 consistency.

STX-SERIES • RIDE-ON POWER TROWEL — OPERATION MANUAL — REV. #0 (03/15/06) — PAGE 39

Page 38 Page 40
Image 39
Page 38 Page 40
Contents STX RIDE-ON Power Trowel STX55Y6 Page Page Page Heres HOW to GET Help STX-SERIES Table of Contents Order via Fax Dealers Only Best Deal! Order via Internet Dealers OnlySee Notes Next STX-SERIES DimensionsThis value includes the seat height Lube Oil CapacityTraining Checklist STX-SERIES Training ChecklistDaily PRE-OPERATION Checklist STX-SERIES Daily PRE-OPERATION ChecklistYou can be Injured if you do not follow these directions STX-SERIES Safety Message Alert SymbolsAlways wear approved eye and hearing protection Always wear approved respiratory protectionSafety Do not operate or service thisFatigue, illness or taking medicine Order Form PT-160 Additional Safety InformationSTX-SERIES Rules for Safe Operation Always keep the work area well organizedAlways keep the battery charged. If Towing Safety PrecautionsSecure portable power cables in cable tray with tie wraps BatteryMaintenance Safety EmergenciesAlways know the location of the nearest first aid kit Hydraulic Steering Intended UseEngine Blades Hydraulic MotorSTX-SERIES Decals Machine Safety DecalsToolbox Compartment Storage for tools STX-SERIES Controls and IndicatorsSTX-SERIES Controls and Indicators Fuel Return Hose Provides fuel to the fuel injection pump STX-SERIES Basic Engine InformationAccelerator system Oil in crankcaseBattery Setup STX-SERIES Trowel SetupTrowel Setup Seat AssemblyHydraulic Oil STX-SERIES PRE-INSPECTIONPRE-INSPECTION Engine OilStarting the Engine STX-SERIES Initial START-UPFuel Initial START-UPEngine Throttle Control Lever Low STX-SERIES Initial START-UPPalm Handle Forward Reverse STX-SERIES OperationOperation SteeringSTX-SERIES Operation Trowel Speed Limiter ControlSpeed limiter control located on the control panel Figure Left Pitch all the way Down Blade Pitch ControlEngine Shut-Down Failure to allow the engine to idleMaintenance STX-SERIES MaintenanceClean the inside of the dust pan Precleaner ServiceAir Cleaner Daily Remove the air cleaner elementFuel Filter 200 Hours Make sure the correct depth airChanging Engine Oil And Filter Oil Filter 100 HoursLong Term Storage STX-SERIES MaintenanceBattery/Charging System Radiator/Cooling SystemPump Actuation Levers Connecting Rod Maintenance ProceduresChecking/Adjusting Trowel Speed Left Side Trowel Speed AdjustmentMatching Blade Pitch for Both Sets of Blades STX-SERIES MaintenanceTrowel Blade Removal Stabilizer Ring RemovalHex Cap Screw Lock Washer Rod End Hex Nut Stabilizer Ring Changing a BladeBronze Bushings Checking Trowel Arm StraightnessSideview Trowel Arm AdjustmentLocate the trowel arm adjustment tool P/N Adjustment Bolt Distance Locking Nut Fixture ArmRe-Assembly Pressure Gauge Hydraulic Pump Checking Hydraulic PressureChecking Steering Pressure Steering Pressure AdjustmentPitch Pressure Check Pitch Pressure Out of SpecificationDecommissioning Trowel/Components Installing Pans Onto Finisher BladesTroubleshooting STX-SERIES TroubleshootingLights optional not working Lights? STX-SERIES TroubleshootingPage Payment Terms Multiquip INC Your Local Dealer is
Related manuals
Manual 64 pages 22.72 Kb

STX55Y6 specifications

The Multiquip STX55Y6 is a state-of-the-art, high-performance compact excavator designed to tackle a variety of jobs in landscaping, construction, and industrial applications. Built with the operator in mind, this machine combines powerful performance, advanced technology, and exceptional maneuverability in tight spaces.

One of the defining features of the STX55Y6 is its robust engine, which delivers powerful performance while ensuring efficiency and reliability. The excavator is equipped with a 55 horsepower, tier 4-compliant diesel engine that meets stringent emissions standards. This not only contributes to environmental sustainability but also provides ample power for demanding tasks.

The STX55Y6 boasts a compact design with a width of just 39 inches, allowing it to easily navigate through narrow passages and tight job sites. Despite its small footprint, it does not compromise on performance, offering a digging depth of up to 10 feet and a maximum reach of 16.2 feet. This makes it an ideal choice for digging trenches, grading, and other excavation tasks.

Another highlight of the STX55Y6 is its advanced hydraulic system, which provides excellent control and precision during operation. The machine features a powerful hydraulic pump that delivers superior lifting and digging capabilities. Furthermore, the auxiliary hydraulic system allows for the attachment of various implements, such as buckets, breakers, and augers, enhancing the versatility of the machine.

Operator comfort is enhanced through a spacious cab that features adjustable seating, advanced visibility, and intuitive controls. The large, multifunction display provides crucial information at a glance, allowing operators to monitor performance and quickly adapt to changing job site conditions.

Durability is a hallmark of the STX55Y6, with a robust frame and reinforced undercarriage designed to withstand the rigors of daily use. This ensures longevity and reduces maintenance costs, making it a wise investment for any construction or landscaping operation.

In conclusion, the Multiquip STX55Y6 offers an impressive blend of power, versatility, and operator comfort. Its reliable engine, advanced hydraulic system, and compact design make it an essential tool for tackling a variety of excavation tasks efficiently and effectively. With its focus on performance and user experience, this excavator is perfectly suited for today's demanding job sites.
Top Page Image Contents