Multiquip STX55Y6 operation manual Precleaner Service, Air Cleaner Daily, Compressed air

Page 31

STX-SERIES — MAINTENANCE

WARNING

Certain maintenance operations or machine adjustments require specialized knowledge and skill. Attempting to perform maintenance operations or adjustments without the proper knowledge, skills or training could result in equipment damage or injury to personnel. If in doubt, consult your dealer.

NOTE

Precleaner Service

Operating the engine with loose or damaged air cleaner components could allow unfiltered air into the engine causing premature wear and failure.

Air Cleaner (Daily)

WARNING

Wear protective equipment such as approved safety glasses or face shields and dust masks or respirators when cleaning air filters with

NOTE

Change the hydraulic oil and

filter after the first 100 hours of use, then change every 250 hours.

compressed air.

If so equipped, wash and re-oil the precleaner every 25 hours of operation (more often under extremely dusty or dirty conditions).

TheYanmar 55 hp engine is equipped with a replaceable, high- density paper air cleaner element. Most are also equipped with an oiled-foam precleaner which surrounds the paper element.

Check the air cleaner daily or before starting the engine. Check for and correct heavy buildup of dirt and debris along with loose or damaged components.

7

2

To service the precleaner perform the following steps, refer to Figure 23:

1.Release the latches located on either side of the air cleaner dust pan (item 6, Figure 23), and remove the dust pan.

2.Remove the air cleaner element.

3.Blow low pressure air from the inside of the element to dislodge the dust and dirt. Do not use excessive air pressure or the element will be damaged and will need to be replaced.

4.Replace the element if it is damaged or excessively dirty.

5.Clean the inside of the dust pan.

3

 

1

6

1.

Air Cleaner Case

4

 

2.

Inner Element (Option)

 

3.Main Element

4.

Dust Pan

 

5.

Latch

5

6.

Arrow Mark (Dust Pan)

 

7.Arrow Mark (Case)

Figure 23. Air Cleaner Components

STX-SERIES • RIDE-ON POWER TROWEL — OPERATION MANUAL — REV. #0 (03/15/06) — PAGE 31

Page 30 Page 32
Image 31
Page 30 Page 32
Contents STX RIDE-ON Power Trowel STX55Y6 Page Page Page Heres HOW to GET Help STX-SERIES Table of Contents Order via Fax Dealers Only Best Deal! Order via Internet Dealers OnlySee Notes Next STX-SERIES DimensionsThis value includes the seat height Lube Oil CapacityTraining Checklist STX-SERIES Training ChecklistDaily PRE-OPERATION Checklist STX-SERIES Daily PRE-OPERATION ChecklistYou can be Injured if you do not follow these directions STX-SERIES Safety Message Alert SymbolsAlways wear approved eye and hearing protection Always wear approved respiratory protectionDo not operate or service this SafetyFatigue, illness or taking medicine Order Form PT-160 Additional Safety InformationSTX-SERIES Rules for Safe Operation Always keep the work area well organizedAlways keep the battery charged. If Towing Safety PrecautionsSecure portable power cables in cable tray with tie wraps BatteryEmergencies Maintenance SafetyAlways know the location of the nearest first aid kit Hydraulic Steering Intended UseEngine Blades Hydraulic MotorSTX-SERIES Decals Machine Safety DecalsToolbox Compartment Storage for tools STX-SERIES Controls and IndicatorsSTX-SERIES Controls and Indicators Fuel Return Hose Provides fuel to the fuel injection pump STX-SERIES Basic Engine InformationAccelerator system Oil in crankcaseBattery Setup STX-SERIES Trowel SetupTrowel Setup Seat AssemblyHydraulic Oil STX-SERIES PRE-INSPECTIONPRE-INSPECTION Engine OilStarting the Engine STX-SERIES Initial START-UPFuel Initial START-UPEngine Throttle Control Lever Low STX-SERIES Initial START-UPPalm Handle Forward Reverse STX-SERIES OperationOperation SteeringTrowel Speed Limiter Control STX-SERIES OperationSpeed limiter control located on the control panel Figure Left Pitch all the way Down Blade Pitch ControlEngine Shut-Down Failure to allow the engine to idleMaintenance STX-SERIES MaintenanceClean the inside of the dust pan Precleaner ServiceAir Cleaner Daily Remove the air cleaner elementFuel Filter 200 Hours Make sure the correct depth airChanging Engine Oil And Filter Oil Filter 100 HoursLong Term Storage STX-SERIES MaintenanceBattery/Charging System Radiator/Cooling SystemPump Actuation Levers Connecting Rod Maintenance ProceduresChecking/Adjusting Trowel Speed Left Side Trowel Speed AdjustmentMatching Blade Pitch for Both Sets of Blades STX-SERIES MaintenanceTrowel Blade Removal Stabilizer Ring RemovalHex Cap Screw Lock Washer Rod End Hex Nut Stabilizer Ring Changing a BladeBronze Bushings Checking Trowel Arm StraightnessSideview Trowel Arm AdjustmentLocate the trowel arm adjustment tool P/N Adjustment Bolt Distance Locking Nut Fixture ArmRe-Assembly Pressure Gauge Hydraulic Pump Checking Hydraulic PressureChecking Steering Pressure Steering Pressure AdjustmentPitch Pressure Check Pitch Pressure Out of SpecificationDecommissioning Trowel/Components Installing Pans Onto Finisher BladesTroubleshooting STX-SERIES TroubleshootingLights optional not working Lights? STX-SERIES TroubleshootingPage Payment Terms Multiquip INC Your Local Dealer is
Related manuals
Manual 64 pages 22.72 Kb

STX55Y6 specifications

The Multiquip STX55Y6 is a state-of-the-art, high-performance compact excavator designed to tackle a variety of jobs in landscaping, construction, and industrial applications. Built with the operator in mind, this machine combines powerful performance, advanced technology, and exceptional maneuverability in tight spaces.

One of the defining features of the STX55Y6 is its robust engine, which delivers powerful performance while ensuring efficiency and reliability. The excavator is equipped with a 55 horsepower, tier 4-compliant diesel engine that meets stringent emissions standards. This not only contributes to environmental sustainability but also provides ample power for demanding tasks.

The STX55Y6 boasts a compact design with a width of just 39 inches, allowing it to easily navigate through narrow passages and tight job sites. Despite its small footprint, it does not compromise on performance, offering a digging depth of up to 10 feet and a maximum reach of 16.2 feet. This makes it an ideal choice for digging trenches, grading, and other excavation tasks.

Another highlight of the STX55Y6 is its advanced hydraulic system, which provides excellent control and precision during operation. The machine features a powerful hydraulic pump that delivers superior lifting and digging capabilities. Furthermore, the auxiliary hydraulic system allows for the attachment of various implements, such as buckets, breakers, and augers, enhancing the versatility of the machine.

Operator comfort is enhanced through a spacious cab that features adjustable seating, advanced visibility, and intuitive controls. The large, multifunction display provides crucial information at a glance, allowing operators to monitor performance and quickly adapt to changing job site conditions.

Durability is a hallmark of the STX55Y6, with a robust frame and reinforced undercarriage designed to withstand the rigors of daily use. This ensures longevity and reduces maintenance costs, making it a wise investment for any construction or landscaping operation.

In conclusion, the Multiquip STX55Y6 offers an impressive blend of power, versatility, and operator comfort. Its reliable engine, advanced hydraulic system, and compact design make it an essential tool for tackling a variety of excavation tasks efficiently and effectively. With its focus on performance and user experience, this excavator is perfectly suited for today's demanding job sites.
Top Page Image Contents