Airlink101 N300 user manual 1 WEP

Page 36

2.Click ‘Set Security’ button when the wireless operating mode you selected is ‘AP Bridge-Point to Point’, ‘AP Bridge-Point to Multi-Point’, or ‘AP Bridge-WDS’.

There are four types of security level you can select: Disable (no security - data encryption disabled), WEP, WPA Pre-shared Key, and WPA Radius. Please refer to the following sections for detailed instructions.

NOTE: If you have enabled Multiple SSID function, please select the SSID network you wish to configure in advance.

Please remember it’s very important to set wireless security settings properly! Without a proper setting, hackers and intruders may gain access to your local network and do something bad to your computers and servers, which could cause serious problem.

There are several things you can do to improve wireless security:

1.Always enable data encryption. Only disable it when you want to open your wireless access point to the public.

2.Never use simple words as encryption password. Use the random combination of symbols, numbers, and alphabets will greatly improve security.

3.Use WPA when possible - it's much safer than WEP.

4.Change encryption password when you’ve used it for too long time.

2.5.1 WEP

WEP (Wired Equivalent Privacy) is a common encryption mode, it’s safe enough for home and personal use. But if you need higher level of security, please consider using WPA encryption (see next Section).

However, some wireless clients don’t support WPA, but only support WEP, so WEP is still a good choice for you if you have such kind of client in your network environment.

When you select ‘WEP’ as encryption type, the following page will be displayed:

35

Page 35 Page 37
Image 36
Page 35 Page 37
Contents User’s Manual Federal Communication Commission Interference Statement Table of Contents Features Package ContentsAccess Point Interface Local Area Network LAN ports 1 to Configuring the Access Point Installing the Access Point to Your NetworkConnect the AP to the Router Power on the AP Page Access Point Universal Repeater AP Client Point-to-Point / Point-to-MultiPoint / WDS Bridge Page Click Finish to end the EZ Setup Wizard Accessing the Access Point by Web Browser Basic SettingsView System Status and Information EssidBssid Page Select an Operating Mode for Access Point AP Mode Diagram 1 AP mode applicationMultiple Essid Ssid Please Note That Essid is Case SensitiveAP Client Mode WMMVlan ID Please Note That Essid is Case Sensitive ­4­2­1 Wireless Site Survey AP Bridge Point to Point Mode Diagram 3 Point to Point Bridge mode applicationPage AP Bridge Point to Multi-Point Mode Diagram 4 Point to Multi‐Point Bridge mode applicationPage AP Bridge WDS Mode Diagram 5 WDS Bridge mode application Main EssidUniversal Repeater Diagram 5 Repeater mode application Main Ssid Configure Wireless Security 1 WEP Page WPA Pre-Shared Key WPA Radius4 802.1x Authentication MD5/PEAP RadiusExternal Radius server. If you check this box, the value Set Up MAC Filtering Page Configure Advanced Settings WMM Configure WPS Setting Page Configure Radius Server Page Change the password of the AP ManagementChange the IP Address of the AP Backup and Restore the Configuration Settings ToolsPage Upgrade the Firmware for the Access Point Reboot the Access Point Troubleshooting Appendix a Specification Technical Support

N300 specifications

The Airlink101 N300 USB Wireless Adapter is a compact and versatile device designed to provide users with high-speed wireless connectivity. Engineered for both home and office environments, this adapter is compliant with the IEEE 802.11n standard and delivers speeds of up to 300Mbps. This performance makes it suitable for activities such as streaming HD videos, online gaming, and video conferencing, ensuring a smooth and uninterrupted experience.

One of the standout features of the Airlink101 N300 is its dual antenna technology. The adapter is equipped with two external antennas that enhance its signal strength and range. This design allows for improved connectivity over longer distances, making it effective for users in larger spaces or those who need to access the internet from different rooms. Furthermore, the adapter supports multiple operating modes, including access point mode and client mode, providing flexibility for various networking scenarios.

In terms of security, the Airlink101 N300 is built with robust protocols to protect users' data. It supports WPA, WPA2, and WEP encryption standards, ensuring that wireless connections are secure against unauthorized access. This focus on security is essential for users who frequently connect to public networks or require secure connections for sensitive work.

The device also boasts a simple plug-and-play setup. With its USB interface, users can easily plug the adapter into their computers or laptops without the need for complicated installations or additional drivers. This ease of use is particularly beneficial for individuals who are not tech-savvy and want to establish a reliable internet connection with minimal hassle.

Another key characteristic of the Airlink101 N300 is its compatibility with multiple operating systems. It works seamlessly with Windows XP, Vista, 7, 8, 10, and Mac OS, making it a versatile choice for a variety of users. This broad compatibility ensures that whether you are using an older machine or a newer model, the adapter will function correctly.

Additionally, the compact design of the Airlink101 N300 makes it an ideal travel companion. Its lightweight build allows users to easily carry the adapter in a laptop bag or pocket, ensuring that reliable internet access is always within reach.

Overall, the Airlink101 N300 USB Wireless Adapter combines performance, security, and convenience, making it a valuable addition to any user's networking toolkit. With its strong features and user-friendly design, it ensures that users can enjoy seamless wireless connectivity for their everyday online activities.
Top Page Image Contents