Airlink101 N300 user manual

Here are descriptions of every setup item:

Key Length	There are two types of WEP key length: 64-bit and 128-bit. Using
	‘128-bit’ is safer than ’64-bit’, but will reduce some data transfer
	performance.
Key Format	There are two types of key format: ASCII and Hex. When you select
	a key format, the number of characters of key will be displayed. For
	example, if you select ’64-bit’ as key length, and ‘Hex’ as key format,
	you’ll see the message at the right of ‘Key Format’ is ‘Hex (10
	characters), which means the length of WEP key is 10 characters.
Default Tx Key	You can set up to four sets of WEP key, and you can decide which
	key is being used by default here. If you don’t know which one you
	should use, select ‘Key 1’.
Encryption Key 1 to 4	Input WEP key characters here, the number of characters must be
	the same as the number displayed at ‘Key Format’ field. You can use
	any alphanumerical characters (0-9, a-z, and A-Z) if you select
	‘ASCII’ key format, and if you select ‘Hex’ as key format, you can use
	characters 0-9, a-f, and A-F. You must enter at least one encryption
	key here, and if you entered multiple WEP keys, they should not be
	same with each other.
Enable 802.1x	Check this box to enable 802.1x user authentication. Please refer to
Authentication	Section 2-7-5 for detailed instructions.
	36