Airlink101 N300 user manual

Page 51

Here are descriptions of every buttons:

Backup Settings	Press ‘Save’ button, and you’ll be prompted to download the
	configuration as a file; default filename is ‘config.bin’, you can save it
	as another filename for different versions, and keep it on your local
	hard drive.

Restore Settings	Press ‘Browse’ to pick a previously-saved configuration file from your
	computer, and then click ‘Upload’ to transfer the configuration file to
	access point. After the configuration is uploaded, the access point’s
	configuration will be replaced by the file you just uploaded.

Restore to Factory	Press ‘Reset’ button to remove all settings you made, and restore the
Default	access point back to factory default settings.

50

Image 51

Contents

User’s Manual Federal Communication Commission Interference Statement Table of Contents Package Contents FeaturesAccess Point Interface Local Area Network LAN ports 1 to Installing the Access Point to Your Network Configuring the Access PointConnect the AP to the Router Power on the AP Page Access Point Universal Repeater AP Client Point-to-Point / Point-to-MultiPoint / WDS Bridge Page Click Finish to end the EZ Setup Wizard Basic Settings Accessing the Access Point by Web BrowserView System Status and Information EssidBssid Page Select an Operating Mode for Access Point Diagram 1 AP mode application AP ModeMultiple Essid Please Note That Essid is Case Sensitive SsidAP Client Mode WMMVlan ID Please Note That Essid is Case Sensitive 421 Wireless Site Survey Diagram 3 Point to Point Bridge mode application AP Bridge Point to Point ModePage Diagram 4 Point to Multi‐Point Bridge mode application AP Bridge Point to Multi-Point ModePage AP Bridge WDS Mode Main Essid Diagram 5 WDS Bridge mode applicationUniversal Repeater Diagram 5 Repeater mode application Main Ssid Configure Wireless Security 1 WEP Page WPA Radius WPA Pre-Shared KeyMD5/PEAP Radius 4 802.1x AuthenticationExternal Radius server. If you check this box, the value Set Up MAC Filtering Page Configure Advanced Settings WMM Configure WPS Setting Page Configure Radius Server Page Change the password of the AP ManagementChange the IP Address of the AP Tools Backup and Restore the Configuration SettingsPage Upgrade the Firmware for the Access Point Reboot the Access Point Troubleshooting Appendix a Specification Technical Support