Airlink101 N300 user manual Configure Radius Server

Page 47

2.9 Configure Radius Server

Comparing to other wireless security measures, radius server provides user-based authentication. If your wireless client supports 802.1x user authentication, you can use the ‘Radius Server’ function to use the internal mini radius server to improve security and wireless user control.

The internal radius server only supports 96 users and 16 IP addresses. If the number of user and/or IP address you need is more than this, please use external radius server.

To set up internal radius server, click ‘Radius Server’ on the left of web management interface, and the following information will be displayed:

Here are descriptions of every setup item:

Enable Radius Server

Check this box to enable internal Radius Server function.

46

Image 47

Contents

User’s Manual Federal Communication Commission Interference Statement Table of Contents Package Contents FeaturesAccess Point Interface Local Area Network LAN ports 1 to Installing the Access Point to Your Network Configuring the Access PointConnect the AP to the Router Power on the AP Page Access Point Universal Repeater AP Client Point-to-Point / Point-to-MultiPoint / WDS Bridge Page Click Finish to end the EZ Setup Wizard Basic Settings Accessing the Access Point by Web BrowserBssid View System Status and InformationEssid Page Select an Operating Mode for Access Point Diagram 1 AP mode application AP ModeMultiple Essid Please Note That Essid is Case Sensitive SsidVlan ID AP Client ModeWMM Please Note That Essid is Case Sensitive 421 Wireless Site Survey Diagram 3 Point to Point Bridge mode application AP Bridge Point to Point ModePage Diagram 4 Point to Multi‐Point Bridge mode application AP Bridge Point to Multi-Point ModePage AP Bridge WDS Mode Main Essid Diagram 5 WDS Bridge mode applicationUniversal Repeater Diagram 5 Repeater mode application Main Ssid Configure Wireless Security 1 WEP Page WPA Radius WPA Pre-Shared KeyMD5/PEAP Radius 4 802.1x AuthenticationExternal Radius server. If you check this box, the value Set Up MAC Filtering Page Configure Advanced Settings WMM Configure WPS Setting Page Configure Radius Server Page Change the IP Address of the AP Change the password of the APManagement Tools Backup and Restore the Configuration SettingsPage Upgrade the Firmware for the Access Point Reboot the Access Point Troubleshooting Appendix a Specification Technical Support