Advantek Networks AWN-AP-54MR user manual Rate and 802.11g supported rate

Page 17

 

 

 

 

 

 

 

 

 

 

 

 

 

 

rate and 802.11g supported rate.

 

 

 

 

The default is 2.4GHz (B+G) mode.

 

 

Mode

 

This Wireless Access Point can support

 

 

 

 

four modes AP, Client, Bridge and

 

 

 

 

Repeater.

 

 

Network Type

 

When in Client mode, you can select

 

 

 

 

between Ad-Hoc and Infrastructure.

 

 

SSID

 

The SSID differentiates one WLAN

 

 

 

 

from another, therefore, all access

 

 

 

 

points and all devices attempting to

 

 

 

 

connect to a specific WLAN must use

 

 

 

 

the same SSID. It is case-sensitive and

 

 

 

 

must not exceed 32 characters. A

 

 

 

 

device will not be permitted to join the

 

 

 

 

BSS unless it can provide the unique

 

 

 

 

SSID. An SSID is also referred to as a

 

 

 

 

network name because essentially it is

 

 

 

 

a name that identifies a wireless

 

 

 

 

network.

 

 

Channel Number

 

Allow user to set the channel manually

 

 

 

 

or automatically.

 

 

 

 

If set channel manually, just select the

 

 

 

 

channel you want to specify.

 

 

 

 

If “Auto” is selected, user can set the

 

 

 

 

channel range to have Wireless Access

 

 

 

 

Point automatically survey and choose

 

 

 

 

the channel with best situation for

 

 

 

 

communication.

 

 

 

 

The number of channels supported

 

 

 

 

depends on the region of this Access

 

 

 

 

Point. All stations communicating with

 

 

 

 

the Access Point must use the same

 

 

 

 

channel.

 

 

￿Enable Mac Clone

(Single

If your ISP restricts service to PCs only,

 

 

Ethernet Client)

 

use the MAC Clone feature to copy a

 

 

 

 

PC Media

 

 

 

 

Access Control (MAC) address to your

 

 

 

 

router. This procedure will cause the

 

 

 

 

router to appear

 

 

 

 

as a single PC, while allowing online

 

 

 

 

access to multiple computers on your

 

 

 

 

network.

 

 

 

 

 

 

 

Apply Changes

 

Press to save the new settings on the

 

 

 

 

 

 

 

14

Image 17
Contents 802.11b+g Access Point CE Mark Warning FCC RF Radiation Exposure StatementTable of Content Introduction FeaturesExample ApplicationWEP/WP Parts Names and FunctionsLED WDS ResetLAN LAN1WEP Factory Default SettingsSsid Check the LEDs Hardware ConnectionClient Mode Infrastructure Access Point ModeWDS Repeater Mode WDS Bridge Mode Client Mode Ad-hocLogin ConfigurationPage Bssid StatisticsPage Basic Settings WirelessRate and 802.11g supported rate Advanced Settings Open System network Data. Upon receipt, the Access Point will respond 802.11g Protection IappSecurity WPA Tkip Radius Access ControlPage Clear all the select mark Dhcp BasicDhcp Page Other Upgrade FirmwareSave/Reload Settings Page System Log Password