Advantek Networks AWN-AP-54MR user manual WPA Tkip

Page 23

Set WEP key

 

￿

Click the Set WEP Keys will prompt you a

 

 

 

 

window to set 64bit or 128bit Encryption.

 

 

 

￿

Select HEX if you are using hexadecimal

 

 

 

 

numbers (0-9, or A-F). Select ASCII if you

 

 

 

 

are using ASCII characters (case-

 

 

 

 

sensitive).

 

 

 

￿

Ten hexadecimal digits or five ASCII

 

 

 

 

characters are needed if 64-bit WEP is

 

 

 

 

used; 26 hexadecimal digits or 13 ASCII

 

 

 

 

characters are needed if 128-bit WEP is

 

 

 

 

used.

 

 

 

 

Encryption:

WPA (TKIP)

 

 

WPA (TKIP): If WPA is selected, users will have to select the Authentication modes between Enterprise (RADIUS) and Personal (Pre-shared Key).

Pre-shared Key

Pre-Shared-Key serves as a password. Users may key in a 8 to 63 characters string to set the password or leave it blank, in which the 802.1x

20

Page 22 Page 24
Image 23
Page 22 Page 24
Contents 802.11b+g Access Point CE Mark Warning FCC RF Radiation Exposure StatementTable of Content Introduction FeaturesExample ApplicationWEP/WP Parts Names and FunctionsLED LAN1 ResetWDS LANWEP Factory Default SettingsSsid Check the LEDs Hardware ConnectionClient Mode Infrastructure Access Point ModeWDS Repeater Mode WDS Bridge Mode Client Mode Ad-hocLogin ConfigurationPage Bssid StatisticsPage Basic Settings WirelessRate and 802.11g supported rate Advanced Settings Open System network Data. Upon receipt, the Access Point will respond 802.11g Protection IappSecurity WPA Tkip Radius Access ControlPage Clear all the select mark Dhcp BasicDhcp Page Other Upgrade FirmwareSave/Reload Settings Page System Log Password
Top Page Image Contents