Advantek Networks AWN-AP-54MR user manual Password, System Log

Page 33

Password

For secure reason, it is recommended that you set the account to access the web server of this Access Point. Leaving the user name and password blank will disable the protection. The login screen prompts immediately once you finish setting the account and password. Remember your user name and password for you will be asked to enter them every time you access the web server of this Access Point.

New Password

Set your new password. Password can be up to 30

 

characters long. Password can contain letter, number

 

and space. It is case sensitive.

Confirm Password

Re-enter the new password for confirmation.

Apply Change

Press to save the new settings on the screen.

Reset

Press to discard the data you have entered since last

 

time you press Apply Change.

System Log

This page display log events with time when events happened, log events’ types, log sources and the description for events themselves. System manager can use the system log to trace when problems occur.

30

Page 32 Page 34
Image 33
Page 32 Page 34
Contents 802.11b+g Access Point CE Mark Warning FCC RF Radiation Exposure StatementTable of Content Introduction FeaturesExample ApplicationParts Names and Functions LEDWEP/WP WDS ResetLAN LAN1Factory Default Settings SsidWEP Check the LEDs Hardware ConnectionAccess Point Mode WDS Repeater ModeClient Mode Infrastructure WDS Bridge Mode Client Mode Ad-hocLogin ConfigurationPage Bssid StatisticsPage Basic Settings WirelessRate and 802.11g supported rate Advanced Settings Open System network Data. Upon receipt, the Access Point will respond 802.11g Protection IappSecurity WPA Tkip Radius Access ControlPage Clear all the select mark Dhcp BasicDhcp Page Other Upgrade FirmwareSave/Reload Settings Page System Log Password
Top Page Image Contents