Advantek Networks AWN-AP-54MR user manual Introduction, Features

Page 4

INTRODUCTION

This is an IEEE802.11b/g compliant 11 Mbps & 54 Mbps Ethernet Wireless Access Point. The Wireless Access Point is equipped with two 10/100 M Auto- sensing Ethernet ports for connecting to LAN and also for cascading to next Wireless Access Point.

This Access Point provides 64/128bit WEP encryption, WPA and IEEE802.1x which ensures a high level of security to protects users’ data and privacy. The MAC Address filter prevents the unauthorized MAC Addresses from accessing your Wireless LAN. Your network security is therefore double assured.

The web-based management utility is provided for easy configuration that your wireless network connection is ensured to be always solid and hassle free.

Features

Two LAN ports for Wireless AP cascade.

Support WPA.

Support AP client mode.

Support WDS for bridge mode.

Support data rate automatic fallback.

Automatic channel selection.

Client access control.

Support 802.1x/Radius client with EAP-TLS, TKIP, AES encryption.

Support IAPP.

Adjustable Tx power, Tx rate, and SSID broadcast.

Allow WEP 64/128 bit.

Web interface management.

Support System event log and statistics.

MAC filtering (For wireless only).

1

Image 4
Contents 802.11b+g Access Point FCC RF Radiation Exposure Statement CE Mark WarningTable of Content Features IntroductionApplication ExampleLED Parts Names and FunctionsWEP/WP Reset WDSLAN LAN1Ssid Factory Default SettingsWEP Hardware Connection Check the LEDsWDS Repeater Mode Access Point ModeClient Mode Infrastructure Client Mode Ad-hoc WDS Bridge ModeConfiguration LoginPage Statistics BssidPage Wireless Basic SettingsRate and 802.11g supported rate Advanced Settings Open System network Data. Upon receipt, the Access Point will respond Iapp 802.11g ProtectionSecurity WPA Tkip Access Control RadiusPage Clear all the select mark Basic DhcpDhcp Page Upgrade Firmware OtherSave/Reload Settings Page Password System Log