Advantek Networks AWN-AP-54MR user manual Basic, Dhcp

Page 27

TCP/IP

Basic

In this page, you can change the TCP/IP settings of this Access Point, select to enable/disable the DHCP Client, 802.1d Spanning Tree, and Clone MAC Address.

 

 

IP Address

This field can be modified only when DHCP Client is

 

 

 

 

 

disabled. If your system manager assigned you static

 

 

 

 

 

IP settings, then you will have to enter the information

 

 

 

 

 

provided.

 

 

 

 

Subnet Mask

Enter the information provided by your system

 

 

 

 

 

manager.

 

 

 

 

Default Gateway

Enter the information provided by your system

 

 

 

 

 

manager.

 

 

 

 

DHCP

Select Disable, Client or Server from the pull-down

 

 

 

 

 

menu.

 

 

 

 

 

Disable: Select to disable DHCP server function.

 

 

 

 

 

Client: Select to automatically get the LAN port IP

 

 

 

 

 

address from ISP (For ADSL/Cable Modem).

 

 

 

 

 

Server: Select to enable DHCP server function.

 

 

 

 

 

 

 

 

 

 

 

24

 

 

Image 27
Contents 802.11b+g Access Point CE Mark Warning FCC RF Radiation Exposure StatementTable of Content Introduction FeaturesExample ApplicationParts Names and Functions LEDWEP/WP LAN1 ResetWDS LANFactory Default Settings SsidWEP Check the LEDs Hardware ConnectionAccess Point Mode WDS Repeater ModeClient Mode Infrastructure WDS Bridge Mode Client Mode Ad-hocLogin ConfigurationPage Bssid StatisticsPage Basic Settings WirelessRate and 802.11g supported rate Advanced Settings Open System network Data. Upon receipt, the Access Point will respond 802.11g Protection IappSecurity WPA Tkip Radius Access ControlPage Clear all the select mark Dhcp BasicDhcp Page Other Upgrade FirmwareSave/Reload Settings Page System Log Password