Allied Telesis AT-WR4600 manual How To Configure the Wlan with QoS, Introduction

Page 1

How To Configure the WLAN with QoS

Introduction

This How to Note explains how to configure Quality of Service (QoS) in a wireless Local Area Network to prioritize traffic under busy conditions.

There is an example scenario provided at the end of this document, which describes the configuration for prioritizing voice traffic. This example could be extended to cover a wider installation case.

For a complete description of the commands used in this document, please refer to the following guide:

“AT-WR4600 Series – Command Reference Guide”.

PN 613-001665 Rev. A

alliedtelesis.com

Page 1 Page 2
Image 1
Page 1 Page 2
Contents
Introduction How To Configure the Wlan with QoSFollowing trademarks appear in this document TrademarksTable of contents Why use Wi-Fi Multimedia? What is Wi-Fi Multimedia WMMOverview How Wi-Fi Multimedia works WMM Access Categories and Ieee 802.1d tag mapping Parameter descriptions How to configure Wi-Fi MultimediaAccessing the device via SSH Connecting AT-WR4600 productsAccessing the CLI Using QoS to prioritize voice traffic Configuration exampleConfigure the common Ssid for open authentication Common setupAssign the static IP address Bridge0 station role root bridgeAT-WR4600config-if#ip address 10.0.0.1/24 Bridge2 station role non-root bridge
Related manuals
Manual 14 pages 58.65 Kb