Allied Telesis AT-WR4600 manual Bridge2 station role non-root bridge

Page 14

[Bridge2] station role: non-root bridge

Assign the static IP address:

AT-WR4600(config)#interface vlan1.1

AT-WR4600(config-if)#no ip address dhcp

AT-WR4600(config-if)#ip address 10.0.0.2/24

AT-WR4600(config-if)#exit

Configure the station role and the SSID to the radio interface for bridging:

AT-WR4600(config)#interface dot11radio 0

AT-WR4600(config-if)#protocol-family an

AT-WR4600(config-if)#station-role non-root bridge

AT-WR4600(config-if)#ssid ATIopen

AT-WR4600(config-if)#bridge-group 1

AT-WR4600(config-if)#no shutdown

AT-WR4600(config-if)#end

© 2012 Allied Telesis, Inc. All rights reserved. Information in this document is subject to change without notice. Allied Telesis is a trademark or registered trademark of Allied Telesis, Inc. in the United States and other countries. All company names, logos, and product designs that are trademarks or registered trademarks are the property of their respective owners.

PN 613-001665 Rev. A

Page 13 Page 14
Image 14
Page 13 Page 14
Contents How To Configure the Wlan with QoS IntroductionTrademarks Following trademarks appear in this documentTable of contents Overview What is Wi-Fi Multimedia WMMWhy use Wi-Fi Multimedia? How Wi-Fi Multimedia works WMM Access Categories and Ieee 802.1d tag mapping How to configure Wi-Fi Multimedia Parameter descriptionsConnecting AT-WR4600 products Accessing the device via SSHAccessing the CLI Configuration example Using QoS to prioritize voice trafficCommon setup Configure the common Ssid for open authenticationBridge0 station role root bridge Assign the static IP addressAT-WR4600config-if#ip address 10.0.0.1/24 Bridge2 station role non-root bridge
Top Page Image Contents