Allied Telesis AT-WR4600 manual Common setup, Configure the common Ssid for open authentication

Page 11

Common setup

To restore the factory configuration on any device, enter the following commands:

AT-WR4600#copy nvram:/factory-config-bridged startup-config

AT-WR4600#reload

Configure the common SSID for open authentication:

AT-WR4600(config)#dot11 ssid ATIopen

AT-WR4600(config-ssid)#authentication open

AT-WR4600(config-ssid)#guest-mode

AT-WR4600(config-ssid)#exit

Page 11 How To: Configure the WLAN with QoS

alliedtelesis.com

Page 10 Page 12
Image 11
Page 10 Page 12
Contents
Introduction How To Configure the Wlan with QoSFollowing trademarks appear in this document TrademarksTable of contents Overview What is Wi-Fi Multimedia WMMWhy use Wi-Fi Multimedia? How Wi-Fi Multimedia works WMM Access Categories and Ieee 802.1d tag mapping Parameter descriptions How to configure Wi-Fi MultimediaAccessing the device via SSH Connecting AT-WR4600 productsAccessing the CLI Using QoS to prioritize voice traffic Configuration exampleConfigure the common Ssid for open authentication Common setupAssign the static IP address Bridge0 station role root bridgeAT-WR4600config-if#ip address 10.0.0.1/24 Bridge2 station role non-root bridge
Related manuals
Manual 14 pages 58.65 Kb