Allied Telesis manual AT-WR4600config-if#ip address 10.0.0.1/24

Page 13

[Bridge1] station role: non-root bridge

[AP1] station role: root access-point

Assign the static IP address:

AT-WR4600(config)#interface vlan1.1

AT-WR4600(config-if)#no ip address dhcp

AT-WR4600(config-if)#ip address 10.0.0.1/24

AT-WR4600(config-if)#exit

Configure the station role and the SSID to the radio interface 0 for bridging:

AT-WR4600(config)#interface dot11radio 0

AT-WR4600(config-if)#protocol-family an

AT-WR4600(config-if)#station-role non-root bridge

AT-WR4600(config-if)#ssid ATIopen

AT-WR4600(config-if)#bridge-group 1

AT-WR4600(config-if)#no shutdown

AT-WR4600(config-if)#exit

Configure the station role, the SSID and WMM to the radio interface 1 for access:

AT-WR4600(config)#interface dot11radio 1

AT-WR4600(config-if)#protocol-family bg

AT-WR4600(config-if)#station-role root access-point

AT-WR4600(config-if)#ssid ATIopen

AT-WR4600(config-if)#bridge-group 1

AT-WR4600(config-if)#traffic-class voice cw-min 2 cw-max 4

fixed-slot 2

AT-WR4600(config-if)#traffic-class best-effort cw-min 4 cw-max 10

fixed-slot 3

AT-WR4600(config-if)#no shutdown

AT-WR4600(config-if)#end

Page 13 How To: Configure the WLAN with QoS

alliedtelesis.com

Image 13 Contents
Introduction How To Configure the Wlan with QoSFollowing trademarks appear in this document TrademarksTable of contents Why use Wi-Fi Multimedia? What is Wi-Fi Multimedia WMMOverview How Wi-Fi Multimedia works WMM Access Categories and Ieee 802.1d tag mapping Parameter descriptions How to configure Wi-Fi MultimediaAccessing the device via SSH Connecting AT-WR4600 productsAccessing the CLI Using QoS to prioritize voice traffic Configuration exampleConfigure the common Ssid for open authentication Common setupAssign the static IP address Bridge0 station role root bridgeAT-WR4600config-if#ip address 10.0.0.1/24 Bridge2 station role non-root bridge
Related manuals
Manual 14 pages 58.65 Kb