Allied Telesis AT-WR4600 manual Accessing the CLI

Page 9

Accessing the CLI

Enter the login and password via the terminal console (SSH or RS-232). Note, by default, the login name is manager and the password is friend.

AT-WR4600 login: manager Password:

Feb 9 10:35:07 AT-WR4600 auth.info login[6898]: root login on 'ttyS0'

AATTTTTTTTTTTTTTTTTT ooooo AAAAA TTTTTTTTTTTTTTT oooooooo

AAAAAAAATTTTTTTT I oooooo

AAAAAAAAAAA TTTTTTT IIIIIIIIII

AAAAAAAAAAAA TTTT IIIIIIIIII

AAAAAAA AAAAA T IIIIIIIIII

Copyright (C) 2012 Allied Telesis International

All rights reserved.

AT-WR4600> enable

Password:

AT-WR4600#

Page 9 How To: Configure the WLAN with QoS

alliedtelesis.com

Image 9

Contents Introduction How To Configure the Wlan with QoSFollowing trademarks appear in this document TrademarksTable of contents What is Wi-Fi Multimedia WMM Why use Wi-Fi Multimedia?Overview How Wi-Fi Multimedia works WMM Access Categories and Ieee 802.1d tag mapping Parameter descriptions How to configure Wi-Fi MultimediaAccessing the device via SSH Connecting AT-WR4600 productsAccessing the CLI Using QoS to prioritize voice traffic Configuration exampleConfigure the common Ssid for open authentication Common setupAssign the static IP address Bridge0 station role root bridgeAT-WR4600config-if#ip address 10.0.0.1/24 Bridge2 station role non-root bridge