3 | SETTING UP YOUR COMPUTERS |
|
The Router has the ability to dynamically allocate network addresses to the computers on your network, using DHCP. However, your computers need to be configured correctly for this to take place. To change the configuration of your computers to allow this, follow the instructions in this chapter.
Obtaining an IP
Address
Automatically
Windows 2000 If you are using a Windows
1From the Windows Start Menu, select Settings > Control Panel.
2Double click on Network and
3Double click on Local Area Connection.
4Click on Properties.
5A screen similar to Figure 8 should be displayed. Select Internet Protocol TCP/IP and click on Properties.