Internet Settings | 47 |
Enter a value of 0 to disable this timeout.
8Click Apply.
Bridged Mode for | Figure 33 Bridge Mode for Single PC Screen |
Single PC |
|
1Enter the VPI and VCI parameters provided to you by your ISP in the VPI and VCI fields.
2Select the encapsulation type (LLC or VC MUX) in the Encapsulation Type field. This information will have been provided to you by your ISP.
3Click Apply.
Routing Mode over | Figure 34 Routing Mode over ATM Screen |
ATM |
|
1Enter the IP address, Subnet Mask and Default Gateway information provided by your ISP into the IP address, Subnet Mask and Default Route fields.
2Enter the VPI and VCI parameters provided to you by your ISP in the VPI and VCI fields.