3Com WL-540A, 3CRWE754G72-A, WL-540B manual WPA-PSK no server WPA-PSK no server Screen

Wireless 41

■64-bit WEP (see page 42)

■WPA (with RADIUS Server) (see page 43)

Select the required value from the drop down list, and press Apply.

Disabled In this mode, wireless transmissions will not be encrypted, and will be visible to everyone. However, when setting up or debugging wireless networks it is often useful to use this security mode.

WPA-PSK (no server) Figure 26 WPA-PSK (no server) Screen

WPA (Wireless Protected Access) provides dynamic key changes and constitutes the best security solution. In a wireless network where not all devices support WPA, WEP (Wired Equivalent Privacy) should be used.

1Enter the pre-shared key in the Pre-shared Key (PSK) field. The pre-shared key is a password, in the form of a word, phrase or series of letters and numbers. The key must be between 8 and 63 characters long and can include spaces and symbols.

Note that each client that connects to the network must use the same key.

2Click Apply.